EN
IT
ES
FR
PL
Tektronix TCP0030A
| Hersteller | Tektronix |
| Modell | TCP0030A |
| Produkt | Current Probe, AC/DC, DC to 120 MHz 30 A DC |
| Type | Used |
SKU
143507
The Tekronix TCP0030 AC/DC Cur Probe is a high-performance and easy-to-use probe that enhances the bandwidth with selectable measurement ranges and also provides low-cur measurement capability and accuracy. The Tektronix TCP0030 Probe is designed specifically for those Oscilloscopes that have the TekVPI™ probe interface.Features and Specifications of the Tektronix TCP0030 AC/DC Cur Probe include: Features: Specifications: Easy-to-use and accurate AC/DC cur measurements Connects directly to Oscilloscopes with the TekVPI™ Probe Interface Provides automatic units scaling and readout on the Oscilloscope display Embeds the probe characteristics within the Oscilloscope Fully programmable over the Oscilloscope's interface Split-core construction allows easy circuit connection High accuracy with typically less than 1% DC gain error Accurately measures cur levels as low as 1 mA Low Noise and DC Drift Easy to degauss and autozero Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access Oscilloscope UI display menu Remote GPIB/USB probe control through the Oscilloscope Safety certified for U.S. and Canada Applications: Power supplies Semiconductor devices Power inverters/converters Electronic ballasts Industrial/consumer electronics Mobile communications Motor drives Transportation systems Bandwidth: DC to ≥120 MHz Rise time: ≤2.92 ns Max RMS cur: 30 A Max peak pulse cur: 50 A Jaw Diameter: 5mm Certified for bare wire voltages up to 150 V CAT II Minimum sensitivity: Cur ranges: 5 A and 30 A DC accuracy: Max amp-second product: 500 Aμs (in 30 A Range) Insertion impedance: Signal delay: 14.5 ns 1 mA (on Oscilloscopes that support 1 mV/div setting) AC Coupling (on Oscilloscopes that support AC/DC coupling) Typical: ±1% Warranted: ±3% 1 mΩ at 10 kHz 3.5 mΩ at 100 kHz 0.08 Ω at 1 MHz 0.15 Ω at 10 MHz 0.7 Ω at 100 MHz 0.85 Ω at 120 MHz
- Easy-to-use and accurate AC/DC cur measurements
- Connects directly to Oscilloscopes with the TekVPI™ Probe Interface
- Provides automatic units scaling and readout on the Oscilloscope display
- Embeds the probe characteristics within the Oscilloscope
- Fully programmable over the Oscilloscope's interface
- Split-core construction allows easy circuit connection
- High accuracy with typically less than 1% DC gain error
- Accurately measures cur levels as low as 1 mA
- Low Noise and DC Drift
- Easy to degauss and autozero
- Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access Oscilloscope UI display menu
- Remote GPIB/USB probe control through the Oscilloscope
- Safety certified for U.S. and Canada
- Applications:
- Power supplies
- Semiconductor devices
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications
- Motor drives
- Transportation systems
- Bandwidth: DC to ≥120 MHz
- Rise time: ≤2.92 ns
- Max RMS cur: 30 A
- Max peak pulse cur: 50 A
- Jaw Diameter: 5mm
- Certified for bare wire voltages up to 150 V CAT II
- Minimum sensitivity:
- 1 mA (on Oscilloscopes that support 1 mV/div setting)
- AC Coupling (on Oscilloscopes that support AC/DC coupling)
- Cur ranges: 5 A and 30 A
- DC accuracy:
- Typical: ±1%
- Warranted: ±3%
- Max amp-second product: 500 Aμs (in 30 A Range)
- Insertion impedance:
- 1 mΩ at 10 kHz
- 3.5 mΩ at 100 kHz
- 0.08 Ω at 1 MHz
- 0.15 Ω at 10 MHz
- 0.7 Ω at 100 MHz
- 0.85 Ω at 120 MHz
- Signal delay: 14.5 ns
- Power supplies
- Semiconductor devices
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications
- Motor drives
- Transportation systems
- 1 mA (on Oscilloscopes that support 1 mV/div setting)
- AC Coupling (on Oscilloscopes that support AC/DC coupling)
- Typical: ±1%
- Warranted: ±3%
- 1 mΩ at 10 kHz
- 3.5 mΩ at 100 kHz
- 0.08 Ω at 1 MHz
- 0.15 Ω at 10 MHz
- 0.7 Ω at 100 MHz
- 0.85 Ω at 120 MHz
Rückgaben
Wenn Sie mit Ihrem Kauf nicht vollständig zufrieden sind, senden Sie den Artikel einfach innerhalb von 30 Tagen nach Erhalt in seinem Originalzustand an uns zurück. Zurückgesandte Artikel müssen unbenutzt sein und in der Originalverpackung mit allen beigefügten Unterlagen zurückgeschickt werden. Nach Erhalt erstatten wir Ihnen den vollen Betrag, abzüglich der ursprünglichen Lieferkosten. Alternativ tauschen wir den Artikel gerne um, wenn Sie dies bevorzugen.
MwSt. (Mehrwertsteuer)
Die Preise verstehen sich exklusive MwSt. Innergemeinschaftliche Transaktionen: Gemäß der EU-Mehrwertsteuerrichtlinie sind B2B-Warenverkäufe über EU-Grenzen hinweg von der MwSt. befreit. Wenn MwSt. berechnet wird, beträgt der Satz 23 %. Außerhalb der EU wird keine MwSt. berechnet.
