Yokogawa DL850E

 YOKOGAWA DL850E SCOPECORDER  (call for availability)

The Yokogawa DL850E ScopeCorder provides powerful features, including high speed sampling, high isolation withstand voltage, and multichannel measurements essential in the development, evaluation, and quality control of energy efficient devices. This ultra-fast memory recorder is a modular, wavefrom recording instrument that can concurrently measure voltage, current, strain, acceleration, and even more phenomena.

Features and Specifications of the Yokogawa DL850E ScopeCorder include:

• Features:
  • Choose from 17 types of input module and install up to 8 in a ScopeCorder at a time to configure a ScopeCorder up to 128 channels.
  • Voltage & Currents
  • Sensor Outputs
  • Temperature, Vibration/Acceleration, Strain, Frequency
  • Logic Signals & CAN / LIN
  • Individually isolated and shielded input channels provide high-resolution and high sample rates.
  • Trend calculations such as active power, power factor, integrated power, harmonics and more using the new power math option.
  • Measurement recording up to 200 days to the large 2 Gpoint acquisition memory, the internal hard disk and/or PC hard disk.
  • GPS or IRIG time synchronization allows synch od data from remote locations.  
  • Giga Zoom Engine II
  • Zoom into 2 Billion samples in just a blink of the eye. Each ScopeCorder is equipped with the revolutionary Giga Zoom Engine II, a powerful processor designed for optimizing access to data seamlessly. It is possible to activate 2 zoom windows while displaying the entire original signal.
  • High-speed:   up to 100 MS/s
  • High Resolution:   up to 16-bit
  • Isolated:   Up to 1kV with the isolated probe 700929 or 701947
  • Multi-channel:   Up to 128 Voltage/Temperature or 128 logic bits
  • Continuous hard disk recording:   at 100 kS/s simultaneously on 16 channels with the /HD0 or /HD1 option
  • 17 plug-in modules allows for flexible assorted measurements
  • Large (2 GPoint) memory offers long duration measurement and two instantaneous zoom locations
  • Dual Capture Function:
    • Record at two diffe sampling rates
    • Catch transients in durability with high-speed sampling
    • Very effective when performing vibration testing of connectors under varying temperatures
    • Chattering is accurately captured at high-speed sampling
    • Check the frequency of occurence at low-speed sampling
• Specifications of the Yokogawa DL850E:
  • Input Section:   Plug-in module
  • Number of slots:
    • 8
    • Max 4 for 720210 modules
    • Max 2 modules for 720240, 720241 (for DL850EV only)
  • Number of input channels:
    • DL850E: 16CH/Slot, 128CH/Unit
    • DL850EV: 120CH/Slot, 336CH/Unit
    • (Maximum simultaneous display waveform is 64 waveforms x 4 screen selectable)
  • Max recording length:   Depends on kinds of modules and number of channels
    • Standard:
      • 250 Mpts(1 Ch)
      • 10 Mpts/Ch (16 CH)
    • With M1 Option:
      • 1 Gpts (1 CH)
      • 50 Mpts/CH (16 CH)
    • With M2 Option:
      • 2 Gpts (1 CH)
      • 100 Mpts/CH (16 CH)
  • Max Time axis setting range:
  • 100ns/div to 1s/div (1-2-5 step)
  • 2s/div, 3s/div, 4s/div, 5s/div, 6s/div, 8s/div, 10s/div, 20s/div, 30s/div, 1min/div to 10min/div (1min step), 12min/div, 15min/div, 30min/div, 1h/div to 10h/div (1h step), 12h/div, 1day/div, 2day/div, 3day/div, 4day/div, 5day/div, 6day/div, 8day/div, 10day/div, 20day/div
  • Time axis accuracy:   ±0.005%
  • Trigger mode:   auto, auto level, normal, single, single(N), ON start
  • Trigger level setting range:   0 centered ±10div
  • Simple Trigger:
  • Trigger source CHn (n: any input channel), Time, External, Line
  • Trigger slope Rising, falling, or rising/falling
  • Time trigger Date (year/month/day), time (hour/minute), time interval (10  
  • seconds to 24 hours)
  • Enhanced Trigger:
  • Trigger source CHn (n: any input channel)
  • Trigger type A †’B(N), A Delay B, Edge on A, OR, AND, Period, Pulse Width, Wave Window
  • Display:   10.4-inch TFT color LCD monitor, 1024×768(XGA)
  • History Memory:   Maximum 5000 waveforms
  • Storage:
    • SD card slot: Memory cards conforms to SD, SDHC, maximum capacity 16GB
    • USB memory:   Mass storage deivce which conforms to USB Mass Storage Class Ver. 1.1
    • External HDD(/HD0 option) Hard disc conforms to eSATA, FAT32  
    • Built-in HDD(/HD1 option) 2.5 inch, 500GB, FAT32
  • General Specifications:
    • Rated power supply voltage:   100 to 120VAC/220 to 240VAC (automatic switching)
    • Rated power supply frequency:   50/60Hz
    • Maximum power consumption:   200VA
    • Withstand voltage:   1500V AC between power supply and earth for 1 minute
    • Insulation resistance:   10MΩ or higher at 500V DC between power supply and earth
  • Modules:
    • 701250 High-speed 10 MS/s 12-Bit Isolation Module (2 ch)
    • 701251 High-speed 1 MS/s 16-Bit Isolation Module (2 ch)
    • 701255 High-speed 10 MS/s 12-Bit non-Isolation Module (2 ch)
    • 701261 Universal Module (2 ch)
    • 701262 Universal Module (with Anti-Aliasing Filter, 2 ch)
    • 701265 Temperature/high-precision voltage Module (2 ch)
    • 701267  
    • High-voltage 100 kS/s 16-Bit Isolation Module (with RMS, 2 ch)
    • 701270 Strain Module (NDIS, 2 ch)
    • 701271 Strain Module (DSUB, Shunt-CAL, 2 ch)
    • 701275 Acceleration/Voltage Module (with Anti-Aliasing Filter, 2 ch)
    • 701280 Frequency Module (2 ch)
    • 701953-L1  16-CH Scanner Box (provided with 1 m cable)
    • 701953-L3  16-CH Scanner Box (provided with 3 m cable)
    •  High-speed 100 MS/s 12-Bit Isolation Module (2 ch)
    •  Voltage Input Module(16 ch)
    • 720221  16-CH Temperature/Voltage Input Module
    •  Logic Input Module (16 ch)
    • 720240 CAN Bus Monitor Module (32 ch, available DL850V only)
    • 720241  CAN & LIN Bus Monitor Module