EMC
EMC Compliance
EMC (Electromagnetic Compatibility) Compliance Standard
9 kHz – 18 GHz Frequency Range
Radiated Emissions, Conducted Emissions, Immunity Testing Test Categories
FCC Part 15, CISPR 22/32, EN 55032, IEC 61000 Applicable Standards
±1.5 dB Measurement Accuracy
| Attribute | Value |
|---|---|
| Compliance Standard | EMC (Electromagnetic Compatibility) |
| Frequency Range | 9 kHz – 18 GHz |
| Test Categories | Radiated Emissions, Conducted Emissions, Immunity Testing |
| Applicable Standards | FCC Part 15, CISPR 22/32, EN 55032, IEC 61000 |
| Measurement Accuracy | ±1.5 dB |
| Dynamic Range | Up to 120 dB |
| Input Impedance | 50 Ohms |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Power Requirements | 100–240 V AC, 50/60 Hz |
| Interface/Connectivity | USB, GPIB, LAN (Ethernet) |
EMC Compliance Options:
- HMS-X - HMS-EMC (HV213) - EMC option including preamplifier, activates all functions required for EMC precompliance measurements
- HMS-X - HMS-3G (HV212) - Bandwidth upgrade, increases frequency range from 1.6 GHz to 3 GHz
- HMS-X - HMS-TG (HV211) - Unlocks the built-in tracking generator (frequency range 5 MHz to 1.6 GHz/3 GHz, output level -20 dBm to 0 dBm)
| Model | Compliance |
|---|
The EMC precompliance set EMC-SET1 includes all necessary instruments to analyse typical EMC problems. This set contains a spectrum analyzer HMS-X incl. HMS-EMC option, a probe set HZ530, the HM6050-2 LISN for line conducted measurements and the HMExplorer software for EMC precompliance measurements.
Key Features
- Frequency range: 100 kHz to 1.6 GHz/3 GHz
- Spectral purity greater than -100 dBc/Hz (at 100 kHz)
- SWEEP from 20 ms to 1000 s
- Detectors: auto-, min-/max.-peak, sample, RMS, average, quasi-peak
- Miscellaneous marker/?marker and peak functions
- Tracking generator
- Frequency range: 5 MHz to 1.6 GHz/3 GHz
- Output level: -20 dBm to 0 dBm
- Directly export data to USB fl ash drive, RS-232/USB dual interfacefor remote control
- Fanless design and fast boot time
