Exfo
Exfo FLS-600
Optical Laser Source 1310/1550nm
Fabry-Perot Laser (FP-LD) Light Source Type
850 nm / 1300 nm (Multimode), 1310 nm / 1550 nm (Singlemode) Wavelength
-20 dBm to -6 dBm (typical, wavelength dependent) Output Power
±0.05 dB over 1 hour Output Power Stability
CW, 270 Hz, 1 kHz, 2 kHz Modulation Modes
| Attribute | Value |
|---|---|
| Light Source Type | Fabry-Perot Laser (FP-LD) |
| Wavelength | 850 nm / 1300 nm (Multimode), 1310 nm / 1550 nm (Singlemode) |
| Output Power | -20 dBm to -6 dBm (typical, wavelength dependent) |
| Output Power Stability | ±0.05 dB over 1 hour |
| Modulation Modes | CW, 270 Hz, 1 kHz, 2 kHz |
| Connector Interface | Universal adapter (FC, SC, ST, LC compatible) |
| Battery Life | Approximately 200 hours with alkaline batteries (AA) |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
| Storage Temperature | -40°C to +70°C (-40°F to 158°F) |
| Dimensions (L x W x H) | 155 mm x 70 mm x 32 mm (6.1 in x 2.76 in x 1.26 in) |
Exfo FLS-600 Options:
- FLS-600 - 01-VCL - 850 nm VCSEL 50/125 μm
- FLS-600 - 12D - 850/1300 nm LED 62.5/125 μm
- FLS-600 - 23BL - 1310/1550 nm laser 9/125 μm
- FLS-600 - 234BL - 1310/1550/1625 nm laser 9/125 μm
- FLS-600 - 235BL - 1310/1490/1550 nm laser 9/125 μm
- FLS-600 - 12D-23BL - 850/1300 nm LED source 62.5/125 μm, 1310/1550 nm laser 9/125 μm
- FLS-600 - EA-EUI-28 - Connector: APC/DIN 47256
- FLS-600 - EA-EUI-89 - Connector: APC/FC narrow key
- FLS-600 - EA-EUI-91 - Connector: APC/SC
- FLS-600 - EA-EUI-95 - Connector: APC/E-2000
- FLS-600 - EI-EUI-28 - Connector: UPC/DIN 47256
- FLS-600 - EI-EUI-76 - Connector: UPC/HMS-10/AG
- FLS-600 - EI-EUI-89 - Connector: UPC/FC narrow key
- FLS-600 - EI-EUI-90 - Connector: UPC/ST
- FLS-600 - EI-EUI-91 - Connector: UPC/SC
- FLS-600 - EI-EUI-95 - Connector: UPC/E-2000
- FLS-600 - 00 - Without visual fault locator
- FLS-600 - VFL - With visual fault locator (universal 2.5 mm connector)
| Model | FLS-600 |
|---|
Using the FLS-600 in Auto-Switching mode allows you to automatically toggle between available wavelengths. When using this source with a compatible power meter (FPM/FOT-600), the latter recognizes the wavelength in use and switches to the proper calibration parameter. Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart, rechargeable batteries.
If you are looking for a new or well-maintained used Exfo - FLS-600 optical laser source 1310/1550nm refurbished with warranty, contact us or request a quote today.
