Fluke
Fluke 5730A Multifunction Calibrator
High-Performance Multifunction Calibrator
0 to ±1100 V DC voltage range
3.5 ppm + 2.5 µV DC voltage, best 1-year accuracy (95 %)
220 mV to 1100 V, 10 Hz to 1 MHz AC voltage range
42 ppm + 8 µV AC voltage, best 1-year accuracy (95 %)
0 to ±2.2 A; ±11 A with 5725A; ±100 A with 52120A DC current range
| Attribute | Value |
|---|---|
| DC voltage range | 0 to ±1100 V |
| DC voltage, best 1-year accuracy (95 %) | 3.5 ppm + 2.5 µV |
| AC voltage range | 220 mV to 1100 V, 10 Hz to 1 MHz |
| AC voltage, best 1-year accuracy (95 %) | 42 ppm + 8 µV |
| DC current range | 0 to ±2.2 A; ±11 A with 5725A; ±100 A with 52120A |
| DC current, best 1-year accuracy (95 %) | 35 ppm + 7 nA |
| AC current range | 9 µA to 2.2 A, 10 Hz to 10 kHz; 11 A with 5725A; 120 A with 52120A |
| AC current, best 1-year accuracy (95 %) | 103 ppm + 8 nA |
| Resistance | 0 to 100 MΩ, 18 values in ×1 and ×1.9 decades |
| Resistance, best 1-year accuracy (95 %) | 6.5 ppm |
| Wideband AC voltage option | 300 µV to 3.5 V, 10 Hz to 50 MHz; 30 MHz option (5730A/03), 50 MHz option (5730A/05) |
| Wideband, best 1-year accuracy (99 %) | 0.4 % + 500 µV |
| Display | 6.5 in touchscreen, choice of nine languages |
| Interfaces | IEEE-488 (GPIB), RS-232, USB 2.0, Ethernet, phase lock in (BNC), phase reference out (BNC) |
| Amplifier support | 5725A, 52120A |
| Warm-up time | Twice the time since last warmed up, maximum 30 minutes |
| Settling time | Less than 5 seconds for all functions and ranges except as noted |
| Temperature | Operating 0 °C to 50 °C; calibration 15 °C to 35 °C; storage −40 °C to 75 °C |
| Line power | 47 Hz to 63 Hz; 100, 110, 115, 120, 200, 220, 230, 240 V ±10 % |
| Power consumption | 300 VA |
| Safety | IEC 61010-1, CAT II, 300 V |
| Guard isolation | 20 V |
| Dimensions (H × W × D) | 17.8 cm (plus 1.5 cm feet) × 43.2 cm × 64.8 cm |
| Weight (without options) | 27 kg |
| Model | 5730A |
|---|
The Fluke 5730A High-Performance Multifunction Calibrator is the successor to the 5720A and the reference standard for calibrating 8.5-digit digital multimeters and other high-end electrical workload. It sources DC and AC voltage up to 1100 V, DC and AC current up to 2.2 A (extendable with the 5725A and 52120A amplifiers) and resistance up to 100 MΩ, and adds a colour touchscreen, remote operation and full compatibility with MET/CAL automated procedures.
