Fluke Networks DSP-FTA410S Multimode Fiber Kit for DSP-4000 Series
| Attribute | Value |
|---|---|
| Compatibility | DSP-4000 Series Cable Analyzers |
| Fiber Type | Multimode Fiber |
| Connector Type | ST Connectors |
| Wavelengths Tested | 850 nm and 1300 nm |
| Test Standards Supported | TIA/EIA-526-14A, IEEE 802.3, FDDI |
| Dynamic Range | Up to 60 dB |
| Measurement Uncertainty | ±0.20 dB |
| Kit Contents | Two DSP-FTA410S Fiber Test Adapters, reference test cords, and carrying case |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
Fluke Networks DSP-FTA410S Multimode Fiber Kit for DSP-4000 Series Options:
- DSP-FTA420S - DSP-FTA420S - Multimode Fiber Test Adapter - Uses LED light sources at 850 nm and 1300 nm
- DSP-FTA430S - DSP-FTA430S - Singlemode Fiber Test Adapter - Uses laser light sources at 1310 nm and 1550 nm wavelengths
- DSP-FTA440S - DSP-FTA440S - Gigabit Multimode Fiber Test Adapter - Uses a VCSEL source at 850 nm and laser source at 1310 nm
| Model | DSP-FTA410S |
|---|
The Fluke Networks DSP‑FTA410S is a high-efficiency fiber optic test accessory designed for use with the DSP‑4000 CableAnalyzer. It supports multimode (850 nm, 1300 nm) and singlemode (1310 nm, 1550 nm) wavelengths, enabling simultaneous two-way fiber testing. It delivers key performance data such as length, propagation delay, wavelength-specific loss, power loss budget, headroom, reference levels, and fiber direction in a single report. Additional features include FindFiber guidance, voice communication over fiber, and visual connector inspection for clean connections.
This accessory is ideal for fast and accurate fiber link qualification, certification, and troubleshooting across both multimode and singlemode networks.
Testwall can supply the used Fluke Networks DSP‑FTA410S, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Fluke Networks DSP‑FTA410S.
