Anritsu 69397B
| Attribut | Valeur |
|---|---|
| Plage de fréquences | 2 MHz à 20 GHz |
| Puissance de sortie maximale | +20 dBm |
| Résolution de fréquence | 0,001 Hz |
| Précision de fréquence | ±1 ppm |
| Pureté spectrale (bruit de phase) | -80 dBc/Hz à 10 kHz du signal porteur |
| Modulation | AM, FM, PM, modulation d'impulsion |
| Connecteur de sortie RF | Type N femelle 50 Ω |
| Alimentation électrique | 100-240 V CA, 50/60 Hz |
| Interface de contrôle | GPIB (IEEE-488), RS-232 |
| Plage de température de fonctionnement | 0 °C à +55 °C |
Anritsu 69397B Options:
- 69397B - Option 1 - Rack Mounting: Rack mount kit containing a set of track slides (90° tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 48 cm equipment rack
- 69397B - Option 2A - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced
- 69397B - Option 2B - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤40 GHz. Rated RF output power is reduced
- 69397B - Option 2C - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤50 GHz. Rated RF output power is reduced
- 69397B - Option 2D - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤60 GHz. Rated RF output power is reduced
- 69397B - Option 2E - Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤8.4 GHz. Rated RF output power is reduced
- 69397B - Option 2F - Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced
- 69397B - Option 6 - Phase Modulation (ΦM): Provides phase modulation capability. FM input, FM output and FM generator become FM/ΦM input, FM/ΦM output and FM/ΦM generator
- 69397B - Option 7 - Delete AM/FM Generators: Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. (Not available in combination with Option 8 or Option 20)
- 69397B - Option 8 - Internal Power Measurement: Adds an internal power measurement function that is compatible with Anritsu 560-7, 5400-71 or 6400-71 series detectors. (Not available in combination with Option 7)
- 69397B - Option 9 - Rear Panel RF Output: Moves RF output connector to the rear panel
- 69397B - Option 10 - User-defined Modulation Capability: Provides user-defined waveform capability. Requires controller (not included). Includes cable and Windows-based software
- 69397B - Option 11 - 0.1 Hz Frequency Resolution: Provides frequency resolution of 0.1 Hz
- 69397B - Option 14 - Anritsu 360B VNA Compatibility: Modifies rack mounting hardware to mate the unit in an Anritsu 360B VNA console
- 69397B - Option 15B - High Power Output: Adds high-power RF components to the instrument in the 2–20 GHz frequency range
- 69397B - Option 16 - High Stability Time Base: Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base. Derate phase noise specification at 10 Hz offset by 8 dB
- 69397B - Option 17A - Delete Front Panel: Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed
- 69397B - Option 18 - mmWave Bias Output: Adds rear panel bias output to drive 54000-xWRxx millimeter wave source modules. BNC Twinax connector. (Not available in combination with Option 20)
- 69397B - Option 19 - SCPI Programmability: Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.2–1987
- 69397B - Option 21A - Low Phase Noise, Non-pulsed Digital Downconverter: Replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW only from 10 MHz to 2.2 GHz
- 69397B - Option 21B - Low Phase Noise, Pulsed Digital Downconverter: Replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW with pulse modulation from 10 MHz to 2.2 GHz
- 69397B - Option 22 - 0.1 Hz to 10 MHz Audio Frequency: Adds CW and step sweep frequency coverage below 10 MHz. No modulation is available below 10 MHz. (Not available in combination with Option 20)
| Model | 69397B |
|---|
Le Keysight (Anritsu) 69397B est un générateur RF haute performance couvrant de 0,010 à 65 GHz, avec un bruit de phase ultra-faible, une commutation rapide (< 5 ms) et une large plage dynamique. Il intègre des modulateurs internes AM, FM et ΦM avec plusieurs formes d’onde, ainsi que des modulations externes, des déclenchements de pulsation flexibles et des fonctions avancées de balayage numérique et analogique. La puissance de sortie varie de +17 dBm à −140 dBm avec un contrôle précis du niveau pour des environnements de test RF exigeants.
Les ingénieurs font confiance au Keysight (Anritsu) 69397B pour tester rigoureusement les filtres, amplificateurs et autres composants RF grâce à ses niveaux de sortie précis, sa rapidité de balayage et ses solides capacités de simulation de signal.
Testwall peut fournir le Keysight (Anritsu) 69397B d’occasion, entièrement testé. Avec un support expert et une livraison mondiale, Testwall garantit une instrumentation hautement performante avec une fiabilité et une qualité de service inégalées. Veuillez nous contacter directement si vous avez besoin d’étalonnage ou de réparation du Keysight (Anritsu) 69397B.
