Anritsu
Anritsu MG3694B
2GHz-40GHz Signal Generator
2 GHz à 40 GHz Plage de fréquence
+20 dBm (typique) Puissance de sortie maximale
0,001 Hz Résolution de fréquence
±1 ppm (référence interne) Précision de fréquence
-80 dBc/Hz à 10 kHz de décalage (typique) Pureté spectrale (bruit de phase)
| Attribut | Valeur |
|---|---|
| Plage de fréquence | 2 GHz à 40 GHz |
| Puissance de sortie maximale | +20 dBm (typique) |
| Résolution de fréquence | 0,001 Hz |
| Précision de fréquence | ±1 ppm (référence interne) |
| Pureté spectrale (bruit de phase) | -80 dBc/Hz à 10 kHz de décalage (typique) |
| Types de modulation | AM, FM, PM, Impulsion (option) |
| Connecteur de sortie RF | 2,92 mm (K) femelle |
| Interface de commande | GPIB, RS-232 |
| Alimentation électrique | 100–240 V CA, 50/60 Hz |
| Plage de température de fonctionnement | 0 °C à +55 °C |
Anritsu MG3694B Options:
- MG3694B - 1A - Rack Mount with slides – Rack mount kit containing a set of track slides (90 degree tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 19-inch equipment rack.
- MG3694B - 1B - Rack Mount without slides – Modifies rack mounting hardware to install unit in a console that has mounting shelves. Includes mounting ears and front panel handles.
- MG3694B - 2A - Mechanical Step Attenuator – Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694B - 2B - Mechanical Step Attenuator – Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694B - 2C - Mechanical Step Attenuator – Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694B - 3 - Ultra Low Phase Noise, main band – Adds new modules to significantly reduce SSB phase noise.
- MG3694B - 4 - 10 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise version – Uses a digital down converter to significantly reduce SSB phase noise.
- MG3694B - 5 - 10 MHz to 2 GHz RF coverage – Uses an analog down converter.
- MG3694B - 6 - Analog Sweep Capability – (limited to ≥500 MHz when used with Option 4).
- MG3694B - 7 - IF Up-Conversion – Adds an internal 40 GHz mixer for up-converting an IF signal.
- MG3694B - 8 - Power Monitor – Adds internal power measurement capability. (Not available with Option 9.)
- MG3694B - 9K - Rear Panel Output – Moves the RF output connector to the rear panel.
- MG3694B - 9V - Rear Panel Output – Moves the RF output connector to the rear panel.
- MG3694B - 10 - User-Defined Modulation Waveform Software – External software package provides the ability to download user-defined waveforms into the memory of the internal waveform generator, serially or via GPIB.
- MG3694B - 12 - Frequency and Phase Modulation – External, via a rear panel BNC connector. For internal modulation capability, requires additionally LF Generator, Option 27.
- MG3694B - 14 - Amplitude Modulation – External, via a rear panel BNC connector. For internal modulation capability, requires additionally LF Generator, Option 27.
- MG3694B - 15A - High Power – Adds high-power RF components to the instrument to increase its output power level.
- MG3694B - 15B - High Power – Adds high-power RF components to the instrument to increase its output power level.
- MG3694B - 15C - High Power – Adds high-power RF components to the instrument to increase its output power level.
- MG3694B - 16 - High Stability Time Base – Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base.
- MG3694B - 17 - Delete Front Panel – Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed. (Only available with Options 1A or 1B)
- MG3694B - 18 - mmW Bias Output – Adds a rear panel BNC Twinax connector required to bias the 63850 series millimeter wave source modules, sold separately. Includes DC bias cable.
- MG3694B - 22 - 0.1 Hz to 10 MHz Audio coverage – Uses a DDS for coverage down to approximately DC. Output power is derated by 2 dB. Frequency resolution below 10 MHz is 0.02 Hz. No modulation available in the 0.1 Hz to 10 MHz band.
- MG3694B - 26B - Pulse Modulation – External, via a rear panel BNC connector. For internal modulation capability, requires additionally Pulse Generator, Option 27.
- MG3694B - 27 - Internal LF and Pulse Generators – Provides modulation waveforms for internal AM, FM, ΦM, and Pulse. (Not available without Option 12, 14, or 26.)
- MG3694B - 28B - Analog Modulation Suite – Bundles Options 12, 14, 26B and 27, offering internal and external AM, FM, ΦM, and Pulse Modulation.
- MG3694B - 30 - Low Phase Noise. (Not available with Option 3.)
- MG3694B - 98 - Standard calibration to ISO 17025 and ANSI/NCSL Z540.
- MG3694B - 99 - Premium calibration to ISO 17025 and ANSI/NCSL Z540. Test report and uncertainty data included.
| Model | MG3694B |
|---|
Le générateur de signaux RF/micro‑ondes Anritsu MG3694B couvre une plage de fréquences de 2 à 40 GHz avec une résolution de 0,01 Hz et une précision temporelle synchronisée à des références 10 MHz internes ou externes. Il fournit jusqu’à +23 dBm à 40 GHz, un bruit de phase de –94 dBc/Hz à 1 kHz de décalage et un temps de commutation d’environ 5 ms par point, avec balayage analogique en option et entrée/sortie de référence 10 MHz externe.
Les ingénieurs en R&D, production et réparation bénéficient de l’Anritsu MG3694B pour tester des filtres, amplificateurs et composants grâce à sa puissance de sortie stable, sa pureté spectrale et sa robustesse.
Testwall peut fournir le Anritsu MG3694B utilisé, entièrement testé. Avec un support expert et une livraison mondiale, Testwall garantit des instruments de haute performance avec une fiabilité et une qualité de service inégalées. Veuillez nous contacter directement si vous avez besoin d’étalonnage ou de réparation du Anritsu MG3694B.
