Audio Precision APX555B
| Attribut | Valeur |
|---|---|
| Plage de fréquence | 10 Hz – 1 MHz |
| Distorsion harmonique totale + bruit (THD+N) | -120 dBFS (0,00010 %) |
| Rapport signal/bruit (SNR) | 130 dB (pondéré A) |
| Niveau de sortie analogique maximum | 26 dBu (14,7 Vrms) |
| Impédance d'entrée analogique | 100 kΩ (déséquilibrée), 200 kΩ (équilibrée) |
| Résolution du convertisseur numérique-analogique (CNA) | 24 bits |
| Interfaces numériques prises en charge | AES3, S/PDIF, TOSLINK, HDMI (ARC), Bluetooth |
| Canaux de mesure | 2 canaux simultanés (entrée et sortie) |
| Plage de niveau d'entrée analogique | -150 dBu à +30 dBu |
| Interface de contrôle et connectivité | USB, LAN (Ethernet), logiciel APx500 inclus |
Audio Precision APX555B Options:
- APX555B - ADC Test Mode Option - Provides adjustable common mode VBias DC offset voltage on balanced analog outputs with Pin Voltage Protection mode
- APX555B - Digital Serial I/O - I2S, TDM, multi-line support (including jitter)
- APX555B - Bluetooth - Supports A2DP, AVRCP, HFP and HSP profiles
- APX555B - HDMI+ARC - Source, sink & monitor (including metadata)
- APX555B - PDM - One-bit audio generation & analysis (including PSRR and jitter)
- APX555B - Advanced Digital - AES/SPDIF/Optical (including jitter)
| Model | APX555B |
|---|
AUDIO PRECISION APX555B Audio Analyzer
With a typical residual THD+N of -120 dB and over 1 MHz bandwidth, the Audio Precision APx555B surpasses the analog performance of all other audio analyzers, including a 5 dB improvement compared to our 2700 Series analyzer. Add to this FFTs of 1.2 million points and full 24-bit resolution, and you have performance unmatched by any other instrument. With the introduction of the B Series, the APx555 further lowers analog system residual distortion at sinewave frequencies above 50 kHz over the full 1 MHz bandwidth.
The APx500 measurement software allows the B Series APx555 to adapt to the needs and preferences of audio designers, engineers and technicians. Sequence Mode provides complete, code-free automation of pre-defined measurement sequences to enable fast and reliable results. Bench Mode provides a real-time interface, with waveforms, FFTs and meters for virtually any parameter enabling the identification of important device interactions. The ADC Test Mode option provides an adjustable common mode VBias DC offset voltage on the balanced analog outputs. A Pin Voltage Protection mode, when enabled, prevents overvoltage damage to your direct-coupled ADC device's input during performance tests.
Specifications for the AUDIO PRECISION APX555B Audio Analyzer Include:
- Industry-best analog performance
- Residual THD+N: -120 dB (typical)
- Over 1 MHz bandwidth @ 24 bits on two channels
- Signal generation up to 204 kHz and 26 Vrms
- 1.2 M point FFTs
- ADC Test Mode option
- Support for the complete range of APx digital I/O options, including 32-bit digital serial I/O at up to 432 kHz sample rate
- Transfer Function Measurement
- Open-Loop Chirp Measurement
- Support for jitter capable digital interface options
- Advanced Master Clock for Reference, Sync and Trigger
- Independent output channel configuration
Click to see all the models of
