California Instruments
California Instruments MX90-3/PI
AC DC Power Supply System, 90kVA, 1 and 3 Phase
90 kVA Puissance de sortie
3 phases Nombre de phases
0 – 300 V (monophasé) / 0 – 520 V (triphasé) Plage de tension de sortie
45 Hz – 5 000 Hz Plage de fréquence de sortie
208 V / 400 V, triphasé Tension d'alimentation d'entrée
| Attribut | Valeur |
|---|---|
| Puissance de sortie | 90 kVA |
| Nombre de phases | 3 phases |
| Plage de tension de sortie | 0 – 300 V (monophasé) / 0 – 520 V (triphasé) |
| Plage de fréquence de sortie | 45 Hz – 5 000 Hz |
| Tension d'alimentation d'entrée | 208 V / 400 V, triphasé |
| Distorsion harmonique totale (THD) | Inférieure à 0,5 % (charge linéaire) |
| Interface de programmation | IEEE-488 (GPIB) / RS-232 / USB |
| Régulation de tension | ±0,1 % en charge statique |
| Courant de sortie maximal | 144 A par phase |
| Dimensions (L x P x H) | 483 mm x 762 mm x 1 752 mm (format rack 19") |
California Instruments MX90-3/PI Options:
- MX90-3/PI - 208 - Configured for 208 V ±10% L-L, 4 wire input
- MX90-3/PI - 230 - Configured for 230 V ±10% L-L, 4 wire input
- MX90-3/PI - 400 - Configured for 400 V ±10% L-L, 4 wire input
- MX90-3/PI - 480 - Configured for 480 V ±10% L-L, 4 wire input
- MX90-3/PI - -411 - IEC 1000-4-11 test firmware
- MX90-3/PI - -LF - Limits maximum frequency to 500 Hz
- MX90-3/PI - -FC - Modifies output frequency control to ± 0.25%
- MX90-3/PI - -LAN - Ethernet Interface
- MX90-3/PI - -HF - Increases max frequency to 905 Hz
- MX90-3/PI - -413 - IEC 1000-4-13 Harmonics & Interharmonics test firmware
- MX90-3/PI - -HV - Adds 400 V L-N AC-only output range
- MX90-3/PI - -XV - Adds other AC-only output range (consult factory)
- MX90-3/PI - -LKM - Clock/Lock Master
- MX90-3/PI - -LKS - Clock/Lock Auxiliary
- MX90-3/PI - -WHM - Watt-Hour Measurement option
- MX90-3/PI - -SNK - Bidirectional auto source and sink mode; offers up to 100% power sink capability in AC mode of operation
- MX90-3/PI - -SNK-DC - Sink DC current mode
- MX90-3/PI - -EXTD - External Drive allows external signal control
- MX90-3/PI - -ABD - ABD0100.1.8 Test Option
- MX90-3/PI - -AMD - Airbus AMD24 Test
- MX90-3/PI - -A350 - Airbus Test Software
- MX90-3/PI - -B787 - Boeing 787 Test Software
- MX90-3/PI - -160 - RTCA/DO-160D, DO-160E, and EUROCAE test firmware
- MX90-3/PI - -704 - Mil Std 704 A-F test firmware/software
- MX90-3/PI - -MB - Reconfigurable multi-box option; MX90-3Pi-MB provides Dual MX45-3Pi controllers allowing separation into individual units
| Model | MX90-3/PI |
|---|
California Instruments MX90-3PI AC Power Source The Calfornia Instruments MX90-3PI power source is much more than a programmable AC, DC or AC+DC power source. It also incorporates an advanced digital signal processor based data acquisition system that continuously monitors all AC source and load parameters. The MX90-3PI consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications. For high power applications, the MX90-3PI is made up of two MX45 chassis, combined in parallel to provide 90kVA of three phase power. This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using the latest DSP technology, the California Instruments MX90-3PI programmable controller is capable of generating harmonic waveforms to test for harmonics susceptibility. Up to 200 waveforms can be stored in nonvolatile memory and given a user defined name for easy recall. Transient programming is easily accomplished from the front panel where clearly laid out menu’s guide the user through the transient definition process. The MX90-3PI AC power source is designed to meet AC source requirements for use in compliance testing such as IEC 61000, 3-2, 3-3, 3-11, 3-12, to name a few. Specifications of the California Instruments MX90-3PI AC Power Source includes: See Datasheet for Full Specifications
