EMC
EMC Partner ESD3000
ESD Simulator, 30 kV
IEC 61000-4-2 Norme de test
±0,1 kV à ±30 kV Plage de tension de sortie
Positive et négative Polarité
Décharge au contact et décharge dans l'air Modes de décharge
330 Ω Résistance interne
| Attribut | Valeur |
|---|---|
| Norme de test | IEC 61000-4-2 |
| Plage de tension de sortie | ±0,1 kV à ±30 kV |
| Polarité | Positive et négative |
| Modes de décharge | Décharge au contact et décharge dans l'air |
| Résistance interne | 330 Ω |
| Capacité de stockage | 150 pF |
| Temps de montée du courant de décharge | 0,7 à 1 ns |
| Alimentation électrique | 100 – 240 V CA, 50/60 Hz |
| Interface de commande | Interface USB et commande à distance |
| Température de fonctionnement | +15 °C à +35 °C |
| Model | Partner |
|---|
The EMC Partner ESD3000 is the only 30 kV ESD Simulator which is both battery operated and completely hand-held, eliminating base unit, external power supply, and power supply tether cable associated with other ESD simulators. Full range of easily interchangeable R-C discharge modules ensures the ESD 3000 meets your changing ESD testing requirements. Light weight, comfortable ergonomics, easy intuitive single-handed operation, clear back-lit LCD display showing all test parameters, and 10 on-board pre-programmable non-volatile memory locations to store ESD test routines; these are just some of the reasons experienced test technicians and engineers applaud the ESD 3000 as the best ESD simulator available. The low purchase price, use of standard consumer NiMH AA size rechargeable batteries, and proven reliability make the ESD3000 easy to justify to management concerned about minimizing operational costs. It even has a pulse counter built-in.The ESD 3000 is a fully automated and programmable ESD simulator. It identifies which discharge module is installed and has a level selector button enabling the user to quickly scroll through and select the voltage from the levels appropriate to the standard and discharge mode. The set pulse count is executed with a single pull of the trigger in either air or direct contact mode. Polarity can be programmed to alternate or can be changed with the push of the +/- button at any time. Voltage can be programmed to ramp up or down or quickly changed at any time by using the up and down arrow buttons.The EMC Partner ESD3000 can be applied to a wide range of test standards. Solutions for the standards listed below are available now. If your standard is not shown, then please let us know. New and custom discharge networks can be produced readily.Applicable Standards: IEC 61000-4-2 IEC 61340-3-1 IEC 61340-3-2 I SO TR10605 MIL 883 MIL-STD-1512 GR-78-CORE RTCA DO 160 *Note ESD3000M1 Discharge Module available separately. EMC Partner ESD3000 Possible Substitutes: Teseq (Schaffner) NSG438 ESD Simulator, 30 kV
