Simplifying Certification Testing Private network operators as well as contractors and installers must make sure the fiber link is installed properly and within specification prior to commissioning the network. This will always be their responsibility. Fiber certification and documentation are also key to ensuring the quality of network installation and meeting industry standards. The AXS-200/360 Fiber Certification Test Set provides unparalleled ease of use and accuracy to perform all fiber certification and troubleshooting tasks. Moreover, it makes it simple to certify fiber to the latest standards. Combined with the AXS-200 Handheld Modular Platform, the AXS-200/360 supports a user-friendly interface and numerous features. Optimized for numerous applications such as 10 Gbit/s, this test set delivers optical loss measurements at multiple wavelengths automatically, verifies user-inputted fiber length, inspects connectors with the optional fiber inspection probe (FIP) and detects breaks with the optional visual fault locator (VFL). Multimode and singlemode fiber certification Your network may be comprised of multimode and singlemode fibers. Thanks to EXFO's complete test set, you can now test both fiber types without changing module. You only need one tester the AXS-200/360. This instrument allows you to qualify the physical layer for up to 10 Gigabit Ethernet transmission on singlemode and multimode fibers. A complete fiber certification solution In addition to a power meter, fiber certification requires a light source, namely the FLS-600 Light Source, which comes with the AXS-200/360 kit. Up to three singlemode wavelengths (1310, 1550, and 1490 or 1625 nm) on a single port, or four wavelengths (850/1300 nm and 1310/1550 nm) on two ports
