Exfo
Exfo FLS-600
Optical Laser Source 1310/1550nm
850 / 1300 nm (multimode), 1310 / 1550 nm (monomode) Longueur d'onde
LED et laser stabilisés Type de source lumineuse
± 0,05 dB sur 15 minutes Stabilité de la puissance de sortie
-20 dBm à -7 dBm selon la longueur d'onde Puissance de sortie typique
Universel (adaptateurs interchangeables : SC, ST, FC, LC) Connecteur
| Attribut | Valeur |
|---|---|
| Longueur d'onde | 850 / 1300 nm (multimode), 1310 / 1550 nm (monomode) |
| Type de source lumineuse | LED et laser stabilisés |
| Stabilité de la puissance de sortie | ± 0,05 dB sur 15 minutes |
| Puissance de sortie typique | -20 dBm à -7 dBm selon la longueur d'onde |
| Connecteur | Universel (adaptateurs interchangeables : SC, ST, FC, LC) |
| Modes de modulation | CW (continu), 270 Hz, 1 kHz, 2 kHz |
| Alimentation | Piles AA (2 unités) ou alimentation secteur optionnelle |
| Autonomie de la batterie | Jusqu'à 200 heures en mode continu |
| Dimensions | 145 mm x 70 mm x 32 mm |
| Température de fonctionnement | -10 °C à +50 °C |
Exfo FLS-600 Options:
- FLS-600 - 01-VCL - 850 nm VCSEL 50/125 μm
- FLS-600 - 12D - 850/1300 nm LED 62.5/125 μm
- FLS-600 - 23BL - 1310/1550 nm laser 9/125 μm
- FLS-600 - 234BL - 1310/1550/1625 nm laser 9/125 μm
- FLS-600 - 235BL - 1310/1490/1550 nm laser 9/125 μm
- FLS-600 - 12D-23BL - 850/1300 nm LED source 62.5/125 μm, 1310/1550 nm laser 9/125 μm
- FLS-600 - EA-EUI-28 - Connector: APC/DIN 47256
- FLS-600 - EA-EUI-89 - Connector: APC/FC narrow key
- FLS-600 - EA-EUI-91 - Connector: APC/SC
- FLS-600 - EA-EUI-95 - Connector: APC/E-2000
- FLS-600 - EI-EUI-28 - Connector: UPC/DIN 47256
- FLS-600 - EI-EUI-76 - Connector: UPC/HMS-10/AG
- FLS-600 - EI-EUI-89 - Connector: UPC/FC narrow key
- FLS-600 - EI-EUI-90 - Connector: UPC/ST
- FLS-600 - EI-EUI-91 - Connector: UPC/SC
- FLS-600 - EI-EUI-95 - Connector: UPC/E-2000
- FLS-600 - 00 - Without visual fault locator
- FLS-600 - VFL - With visual fault locator (universal 2.5 mm connector)
| Model | FLS-600 |
|---|
Using the FLS-600 in Auto-Switching mode allows you to automatically toggle between available wavelengths. When using this source with a compatible power meter (FPM/FOT-600), the latter recognizes the wavelength in use and switches to the proper calibration parameter. Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart, rechargeable batteries.
If you are looking for a new or well-maintained used Exfo - FLS-600 optical laser source 1310/1550nm refurbished with warranty, contact us or request a quote today.
