Keysight (Agilent)
Keysight (Agilent) E2675A
InfiniiMax 6 GHz Differential Browser
Sonde différentielle active Type de sonde
700 MHz Largeur de bande
±8 V (crête) Tension d'entrée différentielle maximale
±25 V (crête) Tension en mode commun maximale
200 kΩ // 2,5 pF Impédance d'entrée
| Attribut | Valeur |
|---|---|
| Type de sonde | Sonde différentielle active |
| Largeur de bande | 700 MHz |
| Tension d'entrée différentielle maximale | ±8 V (crête) |
| Tension en mode commun maximale | ±25 V (crête) |
| Impédance d'entrée | 200 kΩ // 2,5 pF |
| Facteurs d'atténuation | 10:1 et 100:1 (sélectionnables) |
| Tension d'alimentation requise | Compatible avec les oscilloscopes Keysight série 54600 et supérieurs |
| Rapport de réjection en mode commun (CMRR) | 60 dB à 1 MHz |
| Connecteur de sortie | BNC |
| Température de fonctionnement | 0 °C à +55 °C |
Keysight (Agilent) E2675A Options:
- E2675A - E2675B - 6 GHz Differential browser head
- E2675A - E2676B - 6 GHz Single-ended browser probe head
- E2675A - E2677B - 12 GHz Differential solder-in head
- E2675A - E2678B - 12 GHz Differential/single-ended socketed probe head
- E2675A - E2679B - 6 GHz Single-ended solder-in probe head
- E2675A - E2655C - 13 GHz Probe deskew and performance verification kit
- E2675A - E2668B - InfiniiMax I connectivity kit for single-ended measurements (E2676B/77B/78B)
- E2675A - E2669B - InfiniiMax I connectivity kit for diff/single-ended measurements (E2675B/77B/78B)
- E2675A - MX0100A-001 - 25 GHz Micro probe head (set of 5), supports InfiniiMode
- E2675A - MX0100A-002 - 25 GHz Micro probe head (set of 25), supports InfiniiMode
- E2675A - MX0100A-003 - 25 GHz Micro probe head (set of 50), supports InfiniiMode
- E2675A - MX0102A - Soldering Tool Kit
- E2675A - MX0103A - 25 GHz Bullet adapter
- E2675A - MX0104A - 40 GHz Performance verification and deskew fixture
- E2675A - MX0105A - 20 GHz SMA probe head, supports InfiniiMode
- E2675A - MX0106A - 23 GHz Solder-in probe head, supports InfiniiMode
- E2675A - MX0109A - 26 GHz Extreme temperature solder-in head, supports InfiniiMode
- E2675A - MX0020A - 10 GHz InfiniiMax Ultra probe amplifier, AutoProbe 2 interface
- E2675A - MX0021A - 13 GHz InfiniiMax Ultra probe amplifier, AutoProbe 2 interface
- E2675A - MX0022A - 16 GHz InfiniiMax Ultra probe amplifier, AutoProbe 2 interface
- E2675A - MX0023A - 25 GHz InfiniiMax RC probe amplifier, AutoProbe II interface
- E2675A - MX0024A - 20 GHz InfiniiMax Ultra probe amplifier, AutoProbe 2 interface
- E2675A - MX0025A - 25 GHz InfiniiMax Ultra probe amplifier, AutoProbe 2 interface
- E2675A - N2787A - 3D probe positioner
- E2675A - N2823A - 40 GHz 2.92 mm phase-matched cable pair (1 m)
- E2675A - N2833A - InfiniiMax II differential connectivity kit (N2839A, N5381B, N5425B/26A, N2851A/49A)
- E2675A - N2837A - 21 GHz Browser head replace tip kit (set of 40)
- E2675A - N2839A - 21 GHz Browser head
- E2675A - N2849A - 13 GHz QuickTip probe head tips
- E2675A - N2851A - 13 GHz QuickTip probe head
- E2675A - N2852A - AutoProbe II to AutoProbe III interface adapter (for use with UXR 1- and 1.85-mm models)
- E2675A - N2880A - Coaxial attenuator Kit (pairs of 6, 12, and 20 dB attenuators)
- E2675A - N2881A - DC blocking caps (set of 2 30-VDC block caps)
- E2675A - N2884A - 12 GHz ZIF fine wire tips for wafer probing
- E2675A - N2887B - 4 GHz Soft touch pro probe interface adapter
- E2675A - N2888A - 4 GHz Soft touch half-channel probe interface adapter
- E2675A - N5380B - 12 GHz SMA probe head
- E2675A - N5381B - 12 GHz Solder-in probe head
- E2675A - N5425B - 18 GHz ZIF probe head
- E2675A - N5426A - 18 GHz ZIF tip (set of 10)
- E2675A - N5442A - AutoProbe I to AutoProbe II interface adapter (3.5 mm to precision BNC adapter)
- E2675A - N5448B - 40 GHz 2.92 mm phase-matched cable pair (25 cm)
- E2675A - N5450B - Extreme temperature extension cable, 1 m long
- E2675A - N5451A - 5 & 9.9 GHz Long-wired ZIF tip kit (7 and 11 mm)
- E2675A - N2801A - 20 GHz InfiniiMax III probe amplifier
- E2675A - N2802A - 25 GHz InfiniiMax III probe amplifier
- E2675A - N2803A - 30 GHz InfiniiMax III probe amplifier
- E2675A - N2812A - High performance input cable, 2.92 mm connectors, 1 m length
- E2675A - N2830A - 4 GHz InfiniiMax III+ probe amplifier
- E2675A - N2831A - 8 GHz InfiniiMax III+ probe amplifier
- E2675A - N2832A - 13 GHz InfiniiMax III+ probe amplifier
- E2675A - N2835A - InfiniiMax III/III+ differential connectivity kit
- E2675A - N2838A - 25 GHz 450-ohm PCB ZIF tips (set of five)
- E2675A - N2838-68701 - 10x 130-ohm resistors for tip resistor replacement
- E2675A - N2848A - 16 GHz QuickTip probe head, supports InfiniiMode
- E2675A - N2849A - 16 GHz QuickTip tips (set of 4)
- E2675A - N5439A - 28 GHz ZIF probe head
- E2675A - N5440A - 28 GHz 450-ohm ceramic ZIF tip kit (set of five)
- E2675A - N5444A - 30 GHz 3.5/2.92 SMA probe head, supports InfiniiMode
- E2675A - N5445A - 30 GHz Differential browser probe head
- E2675A - N5447A - 28 GHz 200-ohm ceramic ZIF tip kit (set of five)
- E2675A - N5449A - High impedance probe adapter, includes one N2878A 500 MHz 10:1 passive probe
- E2675A - N5476A - 30 GHz Browser tip replacement (set of 4)
- E2675A - N5477A - Sampling scope adapter
- E2675A - N5442A - 3.5 mm to precision BNC adapter
- E2675A - N5443A - Performance verification and deskew fixture (for InfiniiMax III and InfiniiMax III+ > 13 GHz)
- E2675A - N1022B - Probe adapter (for InfiniiMax III+ amp to use with 86100C DCA-J sampling scope)
- E2675A - N5446A-001 - 16 to 20 GHz bandwidth upgrade (InfiniiMax III only)
- E2675A - N5446A-002 - 20 to 25 GHz bandwidth upgrade (InfiniiMax III only)
- E2675A - N5446A-003 - 25 to 30 GHz bandwidth upgrade (InfiniiMax III only)
- E2675A - N5446A-004 - 16 to 25 GHz bandwidth upgrade (InfiniiMax III only)
- E2675A - N5446A-005 - 16 to 30 GHz bandwidth upgrade (InfiniiMax III only)
- E2675A - N5446A-006 - 20 to 30 GHz bandwidth upgrade (InfiniiMax III only)
- E2675A - N7000A - 8 GHz InfiniiMax III+ probe amplifier
- E2675A - N7001A - 13 GHz InfiniiMax III+ probe amplifier
- E2675A - N7002A - 16 GHz InfiniiMax III+ probe amplifier
- E2675A - N7003A - 20 GHz InfiniiMax III+ probe amplifier
- E2675A - 1168B - 10 GHz InfiniiMax II probe amplifier
- E2675A - 1169B - 12 GHz (spec) 13 GHz (typical) InfiniiMax II probe amplifier
- E2675A - MX0100A - 25 GHz Micro probe head, supports InfiniiMode
| Model | E2675A |
|---|
Keysight (Agilent) E2675A Differential Browser
The Keysight E2675A InfiniiMax differential browser probe head is the best choice for general-purpose troubleshooting of differential or single-ended signals with z-axis compliance and variable spacing from 0.25 €“ 5.80 mm (10 €“ 230 mils). The browser kit Includes 20 replaceable tips and ergonomic handle. (Order E2658A for replacement accessories)
For use with the Keysight 1130A, 1131A, 1132A and 1134A InfiniiMax probes, and compatible with the Infiniium 548xx, DSO/MSO 9000, DSO/DSA 80000, and DSO/DSA 90000 oscilloscopes.
Specifications for the Keysight (Agilent) E2675A Differential Browser Include:
| Bandwidth | 6 GHz |
