Keysight (Agilent) N7555A
| Attribut | Valeur |
|---|---|
| Plage de longueur d'onde | 1260 nm à 1640 nm |
| Puissance de sortie maximale | +13 dBm |
| Rapport d'extinction | > 50 dB |
| Largeur de ligne | < 100 kHz |
| Résolution de longueur d'onde | 0,1 pm |
| Précision de longueur d'onde | ± 1 pm |
| Type de connecteur de sortie | FC/APC |
| Interface de commande | GPIB, USB, LAN (LXI) |
| Tension d'alimentation | 100 – 240 V CA, 50/60 Hz |
| Température de fonctionnement | 0 °C à 55 °C |
Keysight (Agilent) N7555A Options:
- N7555A - 3FF - Both 3.5 mm connectors are female on module
- N7555A - 3MF - 1 female and 1 male connector on module, both 3.5 mm
- N7555A - 3MM - Both 3.5 mm connectors are male on module
- N7555A - 150 - Plastic storage box
- N7550X-151 - 3.5 or 2.92 mm torque wrench
- N7550X-152 - Type-N torque wrench
| Model | N7555A |
|---|
Keysight (Agilent) N7555A Electronic Calibration Module
The Keysight N7555A is part of Keysight's family of value-line electronic calibration (ECal) modules that makes calibration of vector network analyzers fast, easy and accurate. Cut your calibration down to half the time it normally takes using a traditional mechanical cal kit. Simply connect it to your instrument and the firmware does the rest. The N7555A supports Keysight's , PNA-X, PNA, ENA, and PXI vector network analyzers and FieldFox handheld analyzers. The N7555A is a 2-port ECal module that supports 3.5 mm connectors.The firmware installed on the instrument is used to control the calibration module, making it a fully integrated solution. The calibration code on the instrument communicates via a USB 2.0 micro-interface and simplifies the calibration to a single connection for a full two-port calibrated measurement.
Specifications for the Keysight (Agilent) N7555A Electronic Calibration Module Include:
| Frequency Range | DC to 26.5 GHz |
| Number of Ports | 2 |
| Connector Type | 3.5mm |
| Connector mix | M-M; M-F; F-F |
