The Kikusui KES4021 Electrostatic Discharge Simulator allows immunity testing on electrical and electronic devices by simulating a direct or indirect electrostatic discharge from a charged human operator.Features of the Kikusui KES4021 ESD Tester include:
Electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard
KES4021 is a slim, lightweight electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard. *
Maximum testing voltage of ±30 kV exceeds all prescribed test levels
The simulator can produce a maximum testing voltage of ±30 kV, allowing testing at higher levels than those required by the IEC standard Level 4 (± 15 kV). This allows you to identify the limit voltages at which the product being tested either malfunctions or breaks down.
Support of ISO 10605 standard (*1)
By fitting a diffe CR unit and discharge chip in the discharge gun, you can use the simulator to produce the waveform prescribed in the ISO 10605 standard, which specifies electrostatic discharge test methods for evaluating electronic modules for automotive use.
Tip charge prevention feature
During a test, the high-voltage power remains in standby mode until you press the TRIGGER switch.
Discharge Method: Contact Discharge and Air Discharge
Set Voltage: 0.50 kV to 30 kV
Polarity: Positive and Negative
Energy Storage Capacitor: 150 pF ± 10% (replaceable)
Discharge Resistor: 330 O ± 10% (replaceable)
Charge Resistor: 50 MO
Discharge Interval: 0.05 / 0.1s to 99.9s
Number of Discharges: 1 to 999 / Continuous
Trigger: Main Panel Trigger and Discharge Gun Trigger
Discharge Cur Waveform: Compliant with the IEC61000-4-2 standard
Interface: RS-232C (optional)
Power Supply: 100 V to 240 V AC (50 Hz to 60 Hz)
KES4021 is a slim, lightweight electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard. *
The simulator can produce a maximum testing voltage of ±30 kV, allowing testing at higher levels than those required by the IEC standard Level 4 (± 15 kV). This allows you to identify the limit voltages at which the product being tested either malfunctions or breaks down.
By fitting a diffe CR unit and discharge chip in the discharge gun, you can use the simulator to produce the waveform prescribed in the ISO 10605 standard, which specifies electrostatic discharge test methods for evaluating electronic modules for automotive use.
During a test, the high-voltage power remains in standby mode until you press the TRIGGER switch.
(*1)The main unit of the electrostatic discharge (ESD) simulator does not adopt floating output. The ISO10605 Standards specify that generators must feature floating output. However, for safety reasons, the KES4021 does not adopt floating outputA variety of discharge tips are available for use with the KES4021.
Si vous n’êtes pas entièrement satisfait de votre achat, il vous suffit de nous retourner l’article dans son état d’origine dans les 30 jours suivant la réception.
Les articles retournés doivent être inutilisés et renvoyés dans leur emballage d’origine avec toute la documentation jointe. Nous procéderons à un remboursement complet à réception, à l’exception des frais de livraison initiaux. En alternative, si vous le préférez, nous pouvons échanger l’article.
TVA
Les prix s'entendent hors TVA.
Transactions intracommunautaires : conformément à la directive européenne sur la TVA, les ventes B2B de biens au sein de l’UE sont exonérées de TVA.
Lorsque la TVA est facturée, un taux de 23 % s’applique.
La TVA n’est pas facturée en dehors de l’UE.
EN
DE
IT
ES
PL
