EN
DE
IT
ES
PL
Power Ten P63C-10660D
| Fabricant | Power Ten |
| Modèle | P63C-10660D |
| Produit | Power Supply, 10V, 660A, 10kW |
| Type | Produit Reconditionné |
POWER TEN P63C-10660D
Power Ten supplies, including the Power Ten P63C-10660D (P63C series) are a strong choice for semiconductor burn-in systems worldwide and are providing solutions to high power DC voltage requirements in many other diverse applications. These include:
- Process Control
- Medical Systems
- Production Test
- Electromagnets
- ATE
- Battery Chargers
- Ion Implant
- Radar Systems
- High Power Lasers
- Research / Labs
All power supply designs from Power Ten employ the most reliable, efficient and cost-effective switching technology, including pulse width modulation (PWM) and zero crossing topology to achieve both high efficiency and high-density packaging. Highlights include: 3-Phase Input Power, Low Peak-to-Peak Ripple & Noise, CE & TUV, Optional IEEE 488.2 and RS 232 Remote Programming with SCPI Protocol
Other features and specifications of the Power Ten P63C-10660D include:
- Output: 10V, 660A, 50mV Ouput P-P Ripple
- Input Voltage: 190-253 VAC, 47-63 Hz
- Input Cur @ 208 VAC (Typical): At 10.0 kW Output: 41 A (Operates from Delta or Wye Source)
- Dimensions: 19" (W) X 5.25" (H) X 22" (D)
- AC Input Interface: 3 wire + GND (#10-32 threaded studs) (208 VAC)
- DC Output Interface
- Control/Monitor Interface: DB 25-pin female connector
- Regulation (Line or Load) Voltage: 0.1% of maximum rated output
- Current: 0.5% of maximum rated output
- Transient Response
- A 30% cur step load will recover to within ±2% of set voltage within 10 msec.
- Stability
- Â ±0.05% of set point per 8 hours after 30 minutes warm-up at fixed line, load and temperature.
- Temperature Coefficient
- 0.02%/ °C of rated output voltage
- 0.03%/ °C of rated output current
- Operating Temperature
- 0 to +50Â ° C, No derating
- Storage Temperature
- -20 to +70Â °C
- Cooling
- Internal fans
- Controls (Front Panel)
- On/Off switch, DC volts adjust, DC amps adjust, OVP preset adjust (limit set)
- Meters/Indicators
- LCD DC voltmeter, ammeter and OVP limit set. LED indicators for voltage mode, cur mode. OVP fault and fault
- Built-In Protection
- Over Voltage, Cur limit Fold back, Over Temperature, Brown Out, Turn On Surge Limit, Slow Start
- Remote Control/Monitor (Rear Panel)
- On/Off control via contact closure, 6-120 VDC, TTL or CMOS switch, output voltage and cur monitor, OVP limit set, summary fault status on P60 Series.
- Remote Programming (Voltage (0 to 100%) Cur (0 to 100%)):
- Resistive: 0-5K ohms 0-5K ohms
- Voltage: 0-5 VDC or 10 VDC 0-5 VDC or 10 VDC
- Optional IEEE 488.2 and RS 232 Programming with SCPI protocol
- Remote Sensing:
- Terminals provided to sense output voltage at load
- Operational Features:
- Master/Slave, Series, Parallel
Retours
Si vous n’êtes pas entièrement satisfait de votre achat, il vous suffit de nous retourner l’article dans son état d’origine dans les 30 jours suivant la réception. Les articles retournés doivent être inutilisés et renvoyés dans leur emballage d’origine avec toute la documentation jointe. Nous procéderons à un remboursement complet à réception, à l’exception des frais de livraison initiaux. En alternative, si vous le préférez, nous pouvons échanger l’article.
TVA
Les prix s'entendent hors TVA. Transactions intracommunautaires : conformément à la directive européenne sur la TVA, les ventes B2B de biens au sein de l’UE sont exonérées de TVA. Lorsque la TVA est facturée, un taux de 23 % s’applique. La TVA n’est pas facturée en dehors de l’UE.
