Sorensen
Sorensen DCS50-20E
50-20A DC Power Supply
0 - 50 V Tension de sortie
0 - 20 A Courant de sortie
1000 W Puissance de sortie maximale
0,05% + 10 mV Régulation de tension en mode CV
0,1% + 10 mA Régulation de courant en mode CC
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 - 50 V |
| Courant de sortie | 0 - 20 A |
| Puissance de sortie maximale | 1000 W |
| Régulation de tension en mode CV | 0,05% + 10 mV |
| Régulation de courant en mode CC | 0,1% + 10 mA |
| Ondulation et bruit (tension) | 1 mV RMS typique |
| Tension d'entrée secteur | 115/230 V CA, 50/60 Hz |
| Interface de programmation | RS-232 / IEEE-488 (GPIB) en option |
| Dimensions (L x H x P) | 425 mm x 133 mm x 508 mm (3U) |
| Température de fonctionnement | 0 °C à 50 °C |
Sorensen DCS50-20E Options:
- DCS50-20E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS50-20E - M9C - Internal IEEE-488/RS 232 Interface (May not be combined with M51A or M85)
- DCS50-20E - M13 - Locking shafts (front panel potentiometers)
- DCS50-20E - M32 - Master/slave paralleling cable configured for two or more units
- DCS50-20E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply's return line (May not be combined with M9C or M85)
- DCS50-20E - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector, 3 ft. connector included (May not be combined with M9C or M51A)
| Model | DCS50-20E |
|---|
