Sorensen
Sorensen DCS60-18E
60-18A DC Power Supply
0 – 60 V Tension de sortie
0 – 18 A Courant de sortie
1080 W Puissance de sortie
115 / 230 V CA, 50/60 Hz Tension d'entrée
0,01 % + 5 mV Régulation de tension
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 60 V |
| Courant de sortie | 0 – 18 A |
| Puissance de sortie | 1080 W |
| Tension d'entrée | 115 / 230 V CA, 50/60 Hz |
| Régulation de tension | 0,01 % + 5 mV |
| Régulation de courant | 0,01 % + 5 mA |
| Ondulation et bruit (tension) | 1 mV RMS typique |
| Interface de programmation | RS-232 / GPIB en option |
| Facteur de forme | Rack 2U (19 pouces) |
| Température de fonctionnement | 0 °C à 50 °C |
Sorensen DCS60-18E Options:
- DCS60-18E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS60-18E - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP (May not be combined with M51A or M85)
- DCS60-18E - M13 - Locking shafts (front panel potentiometers)
- DCS60-18E - M32 - Master/slave paralleling cable configured for two or more units
- DCS60-18E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply's return line (May not be combined with M9C or M85)
- DCS60-18E - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector, 3 ft. connector included (May not be combined with M9C or M51A)
| Model | DCS60-18E |
|---|
The Sorensen DCS60-18E 1 kW, Programmable Power Supply utilizes Switch-Mode technology to achieve High Power density in a low profile chassis. Utilizing unique packaging techniques, the DCS60-18E provides continuous Output Power in any volt/Amp combination
