Sorensen
Sorensen DCS60-50
60-50 DC Power Supply
0 – 60 V CC Tension de sortie
0 – 50 A Courant de sortie
3 000 W Puissance de sortie maximale
0,05 % + 10 mV Régulation de tension
0,1 % + 25 mA Régulation de courant
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 60 V CC |
| Courant de sortie | 0 – 50 A |
| Puissance de sortie maximale | 3 000 W |
| Régulation de tension | 0,05 % + 10 mV |
| Régulation de courant | 0,1 % + 25 mA |
| Ondulation et bruit (tension) | 20 mV crête à crête maximum |
| Interface de programmation | Analogique 0–5 V / 0–10 V, RS-232, GPIB en option |
| Tension d'alimentation secteur | 208 / 240 V CA, monophasé, 50/60 Hz |
| Dimensions (L x H x P) | 483 mm x 132 mm x 635 mm (3U, format rack 19 pouces) |
| Température de fonctionnement | 0 °C à 50 °C |
Sorensen DCS60-50 Options:
- DCS60-50 - M1 - Factory configured for 115 VAC input (1 and 1.2 kW units only)
- DCS60-50 - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP
- DCS60-50 - M13 - Locking shafts (front panel potentiometers)
- DCS60-50 - M32 - Master/slave paralleling cable configured for two or more units
- DCS60-50 - M33 - Replace input connector with terminal block (3 kW only)
- DCS60-50 - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor outputs up to 500V relative to the supply's return line
- DCS60-50 - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector (3 ft. connector included)
| Model | DCS60-50 |
|---|
The Sorensen DCS60-50, 3 kW DC Programmable Switching Power Supply incorporates current Mode Switching rates up to 100 KHz in High Power density, low profile chassis. Utilizing unique packaging techniques, the DCS60-50 provides full Output Power (3 kW)
