Sorensen
Sorensen DCS8-125E
8-125A DC Power Supply
0 – 8 V Tension de sortie
0 – 125 A Courant de sortie
1000 W Puissance de sortie
208/240 V CA, monophasé Tension d'entrée
47 – 63 Hz Fréquence d'entrée
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 8 V |
| Courant de sortie | 0 – 125 A |
| Puissance de sortie | 1000 W |
| Tension d'entrée | 208/240 V CA, monophasé |
| Fréquence d'entrée | 47 – 63 Hz |
| Régulation de tension en charge | 0,05 % + 5 mV |
| Régulation de courant en charge | 0,1 % + 10 mA |
| Ondulation et bruit (tension) | 1 mV RMS / 5 mV crête à crête |
| Interface de programmation | Analogique (0 – 5 V / 0 – 10 V) et RS-232 en option |
| Dimensions (L x H x P) | 425 mm x 88 mm x 585 mm (2U) |
Sorensen DCS8-125E Options:
- DCS8-125E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS8-125E - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP (May not be combined with M51A or M85)
- DCS8-125E - M13 - Locking shafts (front panel potentiometers)
- DCS8-125E - M32 - Master/slave paralleling cable configured for two or more units
- DCS8-125E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply's return line (May not be combined with M9C or M85)
- DCS8-125E - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector, 3 ft. connector included (May not be combined with M9C or M51A)
| Model | DCS8-125E |
|---|
