Sorensen
Sorensen DHP 10
0-50 100.0V Power Supply
10 V Tension de sortie maximale
220 A Courant de sortie maximal
2200 W Puissance maximale
208/240 V CA monophasé Tension d'entrée
0,05 % + 5 mV Régulation de tension
| Attribut | Valeur |
|---|---|
| Tension de sortie maximale | 10 V |
| Courant de sortie maximal | 220 A |
| Puissance maximale | 2200 W |
| Tension d'entrée | 208/240 V CA monophasé |
| Régulation de tension | 0,05 % + 5 mV |
| Régulation de courant | 0,1 % + 10 mA |
| Ondulation et bruit (tension) | 5 mV crête à crête |
| Interface de programmation | RS-232 / GPIB en option |
| Dimensions (L x H x P) | 483 x 88 x 508 mm (2U) |
| Plage de température de fonctionnement | 0 °C à 50 °C |
Sorensen DHP 10 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
