Sorensen
Sorensen DHP 15-200
5-200 15.0V Power Supply
0 - 15,0 V Tension de sortie
200 A Courant de sortie maximum
3000 W Puissance de sortie maximum
0,05% + 5 mV Régulation de tension en charge
0,05% + 25 mA Régulation de courant en charge

| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 - 15,0 V |
| Courant de sortie maximum | 200 A |
| Puissance de sortie maximum | 3000 W |
| Régulation de tension en charge | 0,05% + 5 mV |
| Régulation de courant en charge | 0,05% + 25 mA |
| Ondulation et bruit (tension) | 15 mV crête à crête |
| Tension d'entrée secteur | 208/240 V CA, monophasé |
| Fréquence d'entrée | 47 - 63 Hz |
| Dimensions (L x H x P) | 483 mm x 133 mm x 597 mm |
| Poids | 27,2 kg |
Sorensen DHP 15-200 15.0V Power Supply Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
Le Sorensen DHP 15-200 est une alimentation CC programmable (0–15 V / 0–200 A). L’appareil fournit une tension continue stable et à faible bruit, avec un contrôle précis de la tension et du courant pour la R&D, les tests de production et les bancs de test automatisés. Testwall peut fournir le Sorensen DHP 15-200 d’occasion, entièrement testé. Avec un support expert et une livraison mondiale, Testwall garantit une instrumentation fiable et performante. Contactez-nous pour la réparation ou l’étalonnage du Sorensen DHP 15-200.





