Sorensen
Sorensen DHP 2
0-150 20.0V Power Supply
600 V Tension de sortie maximale
16,7 A Courant de sortie maximal
5000 W Puissance maximale
Tension constante / Courant constant (CV/CC) Type de régulation
RS-232, GPIB (IEEE-488), Analogique Interface de programmation
| Attribut | Valeur |
|---|---|
| Tension de sortie maximale | 600 V |
| Courant de sortie maximal | 16,7 A |
| Puissance maximale | 5000 W |
| Type de régulation | Tension constante / Courant constant (CV/CC) |
| Interface de programmation | RS-232, GPIB (IEEE-488), Analogique |
| Tension d'alimentation secteur | 208 / 240 V CA, monophasé |
| Stabilité de la tension de sortie | 0,01 % ± 2 mV |
| Stabilité du courant de sortie | 0,01 % ± 2 mA |
| Format / Montage | Rack 19 pouces, 3U |
| Plage de température de fonctionnement | 0 °C à 50 °C |
Sorensen DHP 2 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
