Sorensen
Sorensen DHP 20
0-75 200.0V Power Supply
20 V Tension de sortie maximale
165 A Courant de sortie maximal
3 300 W Puissance de sortie maximale
105 - 132 V / 210 - 264 V CA, 50/60 Hz Tension d'entrée
0,05% + 2 mV Régulation de tension en charge
| Attribut | Valeur |
|---|---|
| Tension de sortie maximale | 20 V |
| Courant de sortie maximal | 165 A |
| Puissance de sortie maximale | 3 300 W |
| Tension d'entrée | 105 - 132 V / 210 - 264 V CA, 50/60 Hz |
| Régulation de tension en charge | 0,05% + 2 mV |
| Régulation de courant en charge | 0,1% + 10 mA |
| Ondulation et bruit (tension) | 1 mV RMS / 5 mV crête à crête |
| Ondulation et bruit (courant) | 15 mA RMS |
| Coefficient de température | 0,02% / °C |
| Dimensions (L x H x P) | 483 x 133 x 559 mm (19" x 3U) |
Sorensen DHP 20 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
