Sorensen
Sorensen DHP 30
0-83 300.0V Power Supply
30 V Tension de sortie maximale
33 A Courant de sortie maximal
1000 W Puissance de sortie maximale
115/230 V CA, 50/60 Hz Tension d'entrée
0,01 % + 2 mV Régulation de tension en charge
| Attribut | Valeur |
|---|---|
| Tension de sortie maximale | 30 V |
| Courant de sortie maximal | 33 A |
| Puissance de sortie maximale | 1000 W |
| Tension d'entrée | 115/230 V CA, 50/60 Hz |
| Régulation de tension en charge | 0,01 % + 2 mV |
| Régulation de courant en charge | 0,01 % + 2 mA |
| Ondulation et bruit (tension) | 1 mV efficace typique |
| Interface de programmation | RS-232 / GPIB en option |
| Dimensions (L x H x P) | 425 mm x 133 mm x 597 mm |
| Poids | 27 kg |
Sorensen DHP 30 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
