Sorensen
Sorensen DHP 6
0-50 60.0V Power Supply
0 – 6 V CC Tension de sortie
jusqu'à 330 A Courant de sortie maximum
2000 W Puissance de sortie maximum
± 0,05 % + 5 mV Régulation de tension en mode CV
± 0,1 % + 10 mA Régulation de courant en mode CC
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 6 V CC |
| Courant de sortie maximum | jusqu'à 330 A |
| Puissance de sortie maximum | 2000 W |
| Régulation de tension en mode CV | ± 0,05 % + 5 mV |
| Régulation de courant en mode CC | ± 0,1 % + 10 mA |
| Ondulation et bruit (tension) | 1 mV rms typique |
| Interface de programmation | RS-232 / GPIB en option |
| Tension d'alimentation secteur | 105 – 132 V / 210 – 264 V CA, 47 – 63 Hz |
| Température de fonctionnement | 0 °C à 50 °C |
| Format / Encombrement | Rack 19 pouces, 3U |
Sorensen DHP 6 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
