Sorensen
Sorensen DHP 60
0-33 600.0V Power Supply
60 V Tension de sortie maximale
165 A Courant de sortie maximal
3300 W Puissance de sortie maximale
0,05% + 5 mV Régulation de tension
0,1% + 10 mA Régulation de courant
| Attribut | Valeur |
|---|---|
| Tension de sortie maximale | 60 V |
| Courant de sortie maximal | 165 A |
| Puissance de sortie maximale | 3300 W |
| Régulation de tension | 0,05% + 5 mV |
| Régulation de courant | 0,1% + 10 mA |
| Ondulation et bruit (tension) | 1 mV RMS typique |
| Tension d'entrée secteur | 115/230 V CA, 50/60 Hz |
| Interface de programmation | RS-232 / IEEE-488 (GPIB) en option |
| Température de fonctionnement | 0 °C à 40 °C |
| Dimensions (L x H x P) | 483 mm x 133 mm x 559 mm (3U, 19 pouces) |
Sorensen DHP 60 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
