Sorensen
Sorensen DHP 8
0-62 80.0V Power Supply
0 – 8 V DC Tension de sortie
0 – 600 A Courant de sortie maximum
5000 W Puissance maximale
0,05 % + 5 mV Régulation de tension
0,1 % + 300 mA Régulation de courant
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 8 V DC |
| Courant de sortie maximum | 0 – 600 A |
| Puissance maximale | 5000 W |
| Régulation de tension | 0,05 % + 5 mV |
| Régulation de courant | 0,1 % + 300 mA |
| Ondulation et bruit (tension) | 10 mV RMS typique |
| Tension d'entrée secteur | 208 / 240 V AC, monophasé ou triphasé |
| Interface de programmation | Analogique 0 – 5 V / 0 – 10 V, RS-232 en option |
| Refroidissement | Refroidissement par air forcé |
| Dimensions (L x H x P) | 483 mm x 133 mm x 635 mm (3U, format rack 19") |
Sorensen DHP 8 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
