Sorensen
Sorensen DHP80-375
80-375 DC Power Supply
80 V Tension de sortie maximale
375 A Courant de sortie maximal
30 000 W (30 kW) Puissance de sortie maximale
208/240 V CA, triphasé Tension d'entrée
0,05 % de la pleine échelle Régulation de tension
| Attribut | Valeur |
|---|---|
| Tension de sortie maximale | 80 V |
| Courant de sortie maximal | 375 A |
| Puissance de sortie maximale | 30 000 W (30 kW) |
| Tension d'entrée | 208/240 V CA, triphasé |
| Régulation de tension | 0,05 % de la pleine échelle |
| Régulation du courant | 0,1 % de la pleine échelle |
| Ondulation et bruit (tension) | 50 mV crête à crête maximum |
| Interface de programmation | RS-232, GPIB (IEEE-488) en option |
| Rendement | Jusqu'à 85 % |
| Dimensions (L x H x P) | 483 mm x 132 mm x 711 mm (3U) |
Sorensen DHP80-375 Options:
- DHP80-375 - Option - Three, 3-wire plus ground (3-phase input power)
- DHP80-375 - Option - 400 VAC input (tested to 360-440 VAC)
- DHP80-375 - Option - 480 VAC input (tested to 432-528 VAC)
| Model | DHP80-375 |
|---|
Output: 0-80Vdc 0-375 Amp
Ripple: 15mV (typical)
Regulation (Line or Load)
Voltage: 0.1% of maximum rated output
Current: 0.5% of maximum rated output
Transient Response: 2 ms to steady state output voltage (within 2% of Vmax) for 30% step load change (slower response in paralleled systems)
Stability: ?0.05% maximum rating per 8 hours after a 30 minute warm-up time at fixed line, load and temperature
Efficiency: 80% minimum at full load
Temperature Coefficient: 0.02%/?C of rated output voltage; 0.03%/?C of rated output current
Input:
190-253 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye input may be used (Wye does not require the neutral connection)
Operating Temperature: 0?C to +50?C, no derating
Storage Temperature: -20?C to 70?C
Cooling: Internal fan
