Sorensen
Sorensen DLM 2
0-30 20.0V Power Supply
0 – 600 V CC Tension de sortie
0 – 33 A Courant de sortie
2000 W Puissance de sortie
0,05 % + 5 mV Régulation de tension
0,1 % + 5 mA Régulation de courant
| Attribut | Valeur |
|---|---|
| Tension de sortie | 0 – 600 V CC |
| Courant de sortie | 0 – 33 A |
| Puissance de sortie | 2000 W |
| Régulation de tension | 0,05 % + 5 mV |
| Régulation de courant | 0,1 % + 5 mA |
| Ondulation et bruit (tension) | 1 mV RMS typique |
| Interface de programmation | RS-232 / GPIB en option |
| Tension d'alimentation | 115 / 230 V CA, 50/60 Hz |
| Format | Rack 2U (19 pouces) |
| Température de fonctionnement | 0 °C à 50 °C |
Sorensen DLM 2 Options:
- DLM - M130 - Ethernet/LAN Option (16 bit): LXI Class C Compliant, 10/100 base-T, TCP/IP Protocol, ICMP (Ping Server), Web Server: Direct control of power supply via standard web browser, RS-232C Interface
- DLM - M6 - Disconnect & Polarity reversal relays (10V to 300V models only). Requires one of the following options: M9G, M85, M130 or M131. Output disconnect and polarity reversal relays controlled via SCPI commands. An SPST relay is in line with each output lead.
- DLM - M9G - IEEE-488.2 and RS-232C Interfaces
- DLM - M13 - Locking shafts (front panel potentiometers)
- DLM - M51A - Optically Isolated Analog Programming and Monitoring
- DLM - M85 - Multichannel Slave Interface
- DLM - M131 - Multichannel Slave Interface (16 bit) (M130 Master ONLY)
- DLM - DLMP1 - Paralleling Cable; one cable per slave unit
- DLM - DLMRK - Rackmount Kit for single DLM with filler panel and for two units mounted side-by-side
| Model | DLM |
|---|
