Sorensen SGA800-12.5

FabricantSorensen
ModèleSGA800-12.5
ProduitDC Power Supply, 800V, 12.5A, 1000W
TypeProduit Reconditionné

 

Sorensen SGA80/125

Sorensen SGA80/125

Sorensen SGA800-18.7

Sorensen SGA800-18.7

Obtenir un devis
SKU
138851
SORENSEN SGA800-12.5 DC Power Supply, 800V, 12.5A, 1000W (call for availability)

The Sorensen SGA800-12.5 DC Power Supply is a high powered, programmable power supply designed for exceptional load transient response, low noise, and the highest power density in the industry. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

The Sorensen 
SGA800-12.5 DC Power Supply (SGA = Sorensen General Purpose Analog), with its high performance power electronics, meets the need for simple front panel analog controls or external control. It provides essential features like 10-turn potentiometers for setting voltage and cur, 3 ½ digit LED readout, plus front panel over-voltage protection (OVP) preview/adjustment and reset.

Features and Specifications of the Sorensen 
SGA800-12.5 DC Power Supply include:
  • High Power Density: Up to 15 kW in a 3U chassis
  • Wide Voltage Range: 0-10V up to 0-800V, in increments of 5 kW from 5 to 30 kW
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Low RMS and P-P Noise:  Suitable for the most sensitive applications
  • Parallelable up to 150 kW: Expandable as your requirement grows
  • Modular Design: Upgradeable for the ultimate in investment protection
  • 16-bit Resolution:  Optional IEEE-488.2 + RS-232C + Ethernet provides precise control
  • Common:
  • Remote Sense:  Terminals are provided to sense output voltage at point of load. Maximum line drop 5% of rated voltage per line for 40-100V models, line drop 1V of rated voltage per line for 10-20V models, 1.5V for 30V models, 2% of rated voltage per line for models 160V and greater. (Greater line drop is allowed, but output regulation specifications no longer apply).
  • Parallel Operation:  Up to 5 units may be paralleled for additional cur within the power supply single-unit specifications, with exception of the DC output cur set accuracy. Additional paralleled SG units will add 0.3% inaccuracy per unit. To parallel more than 5 units, contact factory.
  • Series Operation:  Up to 2 units
  • Input:
  • Nominal Voltage 3 phase, 3 wire + ground
      • 208/220 VAC (operating range 187 - 242 VAC)
      • 380/400 VAC (operating range 342 - 440 VAC)
      • 440/480 VAC (operating range 396 - 528 VAC)
  • Frequency:  47 – 63Hz , 400Hz
  • Power Factor
      • >0.9 typical for 208/220 VAC input (10V - 800V)
      • >0.78 typical for 380/400 VAC input (40V - 800V)
      • >0.9 typical for 380/480 VAC input (10V - 30V)
      • >0.7 typical for 440/480 VAC input (40V - 800V)
      • >0.9 typical for 440/480 VAC input (10V - 30V)
  • Protection:  ½ cycle ride-though on all three phases, 3 cycle ride through on single phase; missing phase shutdown (800V model 6.4 msec on all 3 phases)
    • 208/220 VAC (operating range 187 - 242 VAC)
    • 380/400 VAC (operating range 342 - 440 VAC)
    • 440/480 VAC (operating range 396 - 528 VAC)
  • 208/220 VAC (operating range 187 - 242 VAC)
  • 380/400 VAC (operating range 342 - 440 VAC)
  • 440/480 VAC (operating range 396 - 528 VAC)
    • >0.9 typical for 208/220 VAC input (10V - 800V)
    • >0.78 typical for 380/400 VAC input (40V - 800V)
    • >0.9 typical for 380/480 VAC input (10V - 30V)
    • >0.7 typical for 440/480 VAC input (40V - 800V)
    • >0.9 typical for 440/480 VAC input (10V - 30V)
  • >0.9 typical for 208/220 VAC input (10V - 800V)
  • >0.78 typical for 380/400 VAC input (40V - 800V)
  • >0.9 typical for 380/480 VAC input (10V - 30V)
  • >0.7 typical for 440/480 VAC input (40V - 800V)
  • >0.9 typical for 440/480 VAC input (10V - 30V)
  • Output:
  • Voltage and Cur Range: 800V, 12.5A, 10kW
  • Ripple & Noise:
      • rms(20Hz-300kHz): 80mV
      • p-p: 500mV
    • rms(20Hz-300kHz): 80mV
    • p-p: 500mV
  • rms(20Hz-300kHz): 80mV
  • p-p: 500mV
  • Programming & Read-Back Specifications:
  • Front Panel Display:
    • Programming:
      • Accuracy: +/- (0.5%fs + 1 digit)
      • Resolution: 3.5 digits
    • Read-Back Monitoring:
      • Accuracy: +/- (0.5%fs + 1 digit)
      • Resolution: 3.5 digits
    • Knob control & Display read-back
  • Remote Analog Interface
    • Programming:
      • Accuracy:
        • Voltage: +/-0.25% of full scale
        • Cur: 0.8% of full scale 
    • Read-Back Monitoring:
      • Accuracy: +/-1.0% of full scale
    • 25-pin D-sub connector (0~5 V or 0~10 V)
  • Remote Digital Interface:
    • Programming:
      • Accuracy:
        • Voltage:  +/- 0.1% of full scale
        • Cur: +/- 0.4% of full scale
      • Resolution: +/-0.002% of full scale
    • Read-Back Monitoring:
      • Accuracy:
        • Voltage:  +/- 0.15% of full scale
        • Cur:  +/- 0.4% of full scale
      • Resolution:  +/-0.002% of full scale
    • RS-232C (Standard on SGI), Optional IEEE-488.2 and Optional LXI Compliant 10/100 base-T Ethernet
  • OVP:
    • Programming:
      • Accuracy: +/- 1% of full scale
      • Resolution: +/-0.002% of full scale
    • Programming range: 5-110% Configured from front panel, remote analog or via optional digital inputs
  • User I/O:
    • Disconnect & Polarity-reversal relay control (Only available with Ethernet Option)
  • Programming:
    • Accuracy: +/- (0.5%fs + 1 digit)
    • Resolution: 3.5 digits
  • Read-Back Monitoring:
    • Accuracy: +/- (0.5%fs + 1 digit)
    • Resolution: 3.5 digits
  • Knob control & Display read-back
  • Accuracy: +/- (0.5%fs + 1 digit)
  • Resolution: 3.5 digits
  • Accuracy: +/- (0.5%fs + 1 digit)
  • Resolution: 3.5 digits
  • Programming:
    • Accuracy:
      • Voltage: +/-0.25% of full scale
      • Cur: 0.8% of full scale 
  • Read-Back Monitoring:
    • Accuracy: +/-1.0% of full scale
  • 25-pin D-sub connector (0~5 V or 0~10 V)
  • Accuracy:
    • Voltage: +/-0.25% of full scale
    • Cur: 0.8% of full scale 
  • Voltage: +/-0.25% of full scale
  • Cur: 0.8% of full scale 
  • Accuracy: +/-1.0% of full scale
  • Programming:
    • Accuracy:
      • Voltage:  +/- 0.1% of full scale
      • Cur: +/- 0.4% of full scale
    • Resolution: +/-0.002% of full scale
  • Read-Back Monitoring:
    • Accuracy:
      • Voltage:  +/- 0.15% of full scale
      • Cur:  +/- 0.4% of full scale
    • Resolution:  +/-0.002% of full scale
  • RS-232C (Standard on SGI), Optional IEEE-488.2 and Optional LXI Compliant 10/100 base-T Ethernet
  • Accuracy:
    • Voltage:  +/- 0.1% of full scale
    • Cur: +/- 0.4% of full scale
  • Resolution: +/-0.002% of full scale
  • Voltage:  +/- 0.1% of full scale
  • Cur: +/- 0.4% of full scale
  • Accuracy:
    • Voltage:  +/- 0.15% of full scale
    • Cur:  +/- 0.4% of full scale
  • Resolution:  +/-0.002% of full scale
  • Voltage:  +/- 0.15% of full scale
  • Cur:  +/- 0.4% of full scale
  • Programming:
    • Accuracy: +/- 1% of full scale
    • Resolution: +/-0.002% of full scale
  • Programming range: 5-110% Configured from front panel, remote analog or via optional digital inputs
  • Accuracy: +/- 1% of full scale
  • Resolution: +/-0.002% of full scale
  • Disconnect & Polarity-reversal relay control (Only available with Ethernet Option)
  •     

    No Related Posts

    Retours

    Si vous n’êtes pas entièrement satisfait de votre achat, il vous suffit de nous retourner l’article dans son état d’origine dans les 30 jours suivant la réception. Les articles retournés doivent être inutilisés et renvoyés dans leur emballage d’origine avec toute la documentation jointe. Nous procéderons à un remboursement complet à réception, à l’exception des frais de livraison initiaux. En alternative, si vous le préférez, nous pouvons échanger l’article.

    TVA

    Les prix s'entendent hors TVA. Transactions intracommunautaires : conformément à la directive européenne sur la TVA, les ventes B2B de biens au sein de l’UE sont exonérées de TVA. Lorsque la TVA est facturée, un taux de 23 % s’applique. La TVA n’est pas facturée en dehors de l’UE.

    Clicky