Tektronix
Tektronix HDST1
HD-STI Stress Test Module for TG2000
Kit de décodage pour bus série haute définition Type d'accessoire
Oscilloscopes Tektronix série MDO4000C, MSO/DPO4000B, MSO/DPO5000, MSO/DPO7000 Compatibilité
HDMI, DisplayPort, MHL Protocoles pris en charge
Jusqu'à 6 GHz Bande passante maximale
4 voies différentielles Nombre de voies
| Attribut | Valeur |
|---|---|
| Type d'accessoire | Kit de décodage pour bus série haute définition |
| Compatibilité | Oscilloscopes Tektronix série MDO4000C, MSO/DPO4000B, MSO/DPO5000, MSO/DPO7000 |
| Protocoles pris en charge | HDMI, DisplayPort, MHL |
| Bande passante maximale | Jusqu'à 6 GHz |
| Nombre de voies | 4 voies différentielles |
| Impédance d'entrée | 50 Ω |
| Tension d'entrée maximale | ±2 V |
| Connecteurs | Connecteurs SMA pour connexion aux oscilloscopes |
| Alimentation | Alimentation via port USB (5 V CC) |
| Dimensions (L x l x H) | 214 mm x 140 mm x 44 mm |
Tektronix HDST1 Options:
- HDST1 - Opt. C3 - Calibration Service 3 Years
- HDST1 - Opt. R3 - Repair Service 3 Years
- HDST1 - Opt. 88 - Assembled and calibrated as a single unit
| Model | HDST1 |
|---|
TEKTRONIX HDST1
The Tektronix HDST1 is a HD-SDI Stress Test module that supports stress test capability for 1.485 and 1.485/1,001 Gb/s HD-SDI signals. The HDST1 takes in a single HD-SDI signal and outputs a stressed HD-SDI signal. HD signals from test signal generators (including the HDVG1 module), as well as from HD camera, VTRs, or switchers, can be used as the input signal. Signal stressing options include jitter (amplitude or frequency), amplitude, duty cycle, and random error insertion. The HDVG1 is recommended as a signal source, since it is capable of providing a signal with low residual jitter, as well as the ability to incorporate its frequency offset stress feature.
Features of the Tek HDST1 include:
- Amplitude and duty cycle of the output signal, jitter amplitude and frequency, and error rate are adjustable in real-time from the front panel of the TG2000
- Cable simulator of 20 m and 100 m
- Error insertion
- Calibration signal output
- Full remote control using GPIB or RS-232C Interface
