Yokogawa

Yokogawa 701251

Analog Voltage Input Module, High-Speed 1 Ms/s 16-Bit Isolation Module (2 ch)
16 voies Nombre de voies
12 bits Résolution verticale
200 MHz Bande passante
500 MS/s Fréquence d'échantillonnage maximale
jusqu'à 16 MW par voie Longueur d'enregistrement
Demander la fiche technique
Attribut Valeur
Nombre de voies 16 voies
Résolution verticale 12 bits
Bande passante 200 MHz
Fréquence d'échantillonnage maximale 500 MS/s
Longueur d'enregistrement jusqu'à 16 MW par voie
Plage de tension d'entrée 5 mV/div à 20 V/div
Impédance d'entrée 1 MΩ / 50 Ω
Type d'affichage Écran LCD couleur TFT 12,1 pouces
Interface de communication USB, Ethernet (LAN), GP-IB (en option)
Alimentation électrique 100 à 240 V CA, 50/60 Hz
Yokogawa 701251 Options:
  • 701251 - 701947 - 100:1 Probe (for isolated BNC input) 1000 V (DC+ACpeak) CAT II, 1.5 m
  • 701251 - 702902 - 10:1 Probe (for isolated BNC input) operating temp. range: −40 to 85°C, 2.5 m
  • 701251 - 700929 - 10:1 Probe (for isolated BNC input) 1000 V (DC+ACpeak) CAT II, 1.5 m
  • 701251 - 701901 - 1:1 Safety BNC adapter lead 1000 Vrms CAT II
  • 701251 - 701904 - 1:1 Safety Adapter Lead 1000 Vrms CAT II, 600 Vrms CAT III
  • 701251 - B9852MM - Safety mini-clip (Hook type) 1000 Vrms CAT III black
  • 701251 - B9852MN - Safety mini-clip (Hook type) 1000 Vrms CAT III red
  • 701251 - 701954 - Large alligator-clip (Dolphin type) 1000 Vrms CAT II, 1 set each of red and black
  • 701251 - 758929 - Alligator clip adaptor set (Rated voltage 1000 V) 1000 Vrms CAT II, 1 set each of red and black
  • 701251 - 758922 - Alligator clip adaptor set (Rated voltage 300 V) 300 Vrms CAT II, 1 set each of red and black
  • 701251 - 758921 - Fork terminal adapter set 1000 Vrms CAT II, 1 set each of red and black
  • 701251 - 366926 - 1:1 BNC-alligator cable Non-isolated 42 V or less, 1 m
  • 701251 - 366961 - 1:1 Banana-alligator cable Non-isolated 42 V or less, 1.2 m
  • 701251 - 701917 - Current probe 5 Arms, DC to 50 MHz
  • 701251 - 701918 - Current probe 5 Arms, DC to 120 MHz
  • 701251 - 701932 - Current probe 30 Arms, DC to 100 MHz
  • 701251 - 701933 - Current probe 30 Arms, DC to 50 MHz
  • 701251 - 701930 - Current probe 150 Arms, DC to 10 MHz
  • 701251 - 701931 - Current probe 500 Arms, DC to 2 MHz
  • 701251 - 720930 - Clamp-on probe AC 50 Arms
  • 701251 - 720931 - Clamp-on probe AC 200 Arms
  • 701251 - 701934 - Probe power supply, large current output, external probe power supply (4 outputs)
  • 701251 - 438920 - Shunt resistor 250 Ω ±0.1%
  • 701251 - 438921 - Shunt resistor 100 Ω ±0.1%
  • 701251 - 438922 - Shunt resistor 10 Ω ±0.1%
  • 701251 - 700924 - Differential probe 1400 Vpk, 1000 Vrms CAT II
  • 701251 - 701926 - Differential probe 7000 Vpk, 5000 Vrms
  • 701251 - 758924 - Safety BNC-banana adapter 500 Vrms CAT II
  • 701251 - 701902 - Safety BNC-BNC cable (1 m) 1000 Vrms CAT II (BNC-BNC)
  • 701251 - 701903 - Safety BNC-BNC cable (2 m) 1000 Vrms CAT II (BNC-BNC)
  • 701251 - 701948 - Plug-on clip for 700929 and 701947
  • 701251 - 701906 - Long test clip for 700924, 701901 and 701926
  • 701251 - 758917 - Measurement lead set, measurement leads (2 per set), alligator-clip required separately
  • 701251 - 758933 - Measurement lead set 1000 V/19 A/1 m length, alligator-clip required separately
Formulaire d'étalonnage Yokogawa 701251

Formulaire de réparation Yokogawa 701251
Maximum file size: 40MB

No Related Posts

Plus d'informations
Model701251

YOKOGAWA 701251 ANALOG VOLTAGE INPUT MODULE

The Yokogawa 701251 Analog Voltage Input Module is a two input channel, high speed, isolation module designed to provide a high sensitivity range, low noise, and high noise immunity.  

Features and Specifications of the Yokogawa 701251 Analog Voltage Input Module include:

Features:

  • High Speed:  1Ms/s
  • High Sensitivity Range:  10 mV
  • Low Noise:   ±100  Î¼V (typical)
  • High noise immunity

Specifications:

  • Effective measurement range:  Twice of setting range
  • Number of input channels:  2
  • Input coupling:  AC, DC, and GND
  • Maximum sample rate:  1 MS/s  
  • Input format:  Isolated unbalanced
  • Frequency characteristics (-3 dB point when a sine wave of amplitude 60% of range is input):  
    • 50 mV to 200 V range: DC to 300 kHz
    • 20 mV and 10 mV range: DC to 200 kHz
  • Voltage-axis range setting:  10 mV to 200 V range (1-2-5 steps)
  • Maximum input voltage (at frequency of 1 kHz or less):
    • Combined with the 700929 (10:1):  600 V (DC+ACpeak)
    • Combined with the 701901+701954  (1:1):  140 V (DC+ACpeak)
    • Direct input or cable not complying w/safety standard: 140V  (DC+ACpeak)
  • Maximum allowable common mode voltage (at a frequency of 1 kHz or less):
    • Working voltage of safety standard  
    • Combined with the 700929 (10:1) or combined with the 701901+701954 (1:1):  400 Vrms  (CAT l),  300 Vrms (CAT ll)
    • Direct input or cable not complying w/safety standard:  42 V (DC+ACpeak)(CAT l and CAT ll, 30 Vrms)
  • Vertical (voltage) axis accuracy DC accuracy:
    • 50 mV to 200V range:   ±(0.25% of  range)
    • 20 mV range:   ±(0.3% of  range)
    • 10 mV range:   ±(0.5% of  range)
  • Input connector:  BNC connector (isolated type)
  • Input impedance:  1 MΩ ± 1%, approximately 35 pF
  • -3 dB point when AC coupled low frequency attenuation point:  10 Hz or less (1 Hz or less when using the 700929)
  • Common mode rejection ratio:  80 dB (50/60 Hz) or more (typical)
  • Residual noise level (input section shorted): ±100 μ V or   ±0.1% of range, whichever is greater (typical)
  • Withstand voltage:  1500 Vrms for 1 minute (across each terminal and earth) (60 Hz)
  • Allowable transient surge voltage (instantaneous):   ±2100 Vpeak (across each input terminal and earth)
  • Insulation resistance:  500 VDC, 10 MΩ or more  (across each input terminal and earth)
  • A/D conversion resolution:  16 bit (2400 LSB/range)
  • Temperature coefficient:
    • Zero point:
      • 50 mV to 200 V range:   ±(0.02% of  range)/ ºC(typical)      
      • 20 mV range:   ±(0.05% of  range)/ ºC(typical)    
      • 10 mV range:   ±(0.10% of  range)/ ºC(typical)
    • Gain:  10 mV to 200 V range:   ±(0.02% of  range)/ ºC(typical)
  • Bandwidth limit:  
    • Select from OFF, 40 kHz, 4 kHz, and 400 Hz
    • Cut-off characteristics:  -12 dB/OCT (typical)
  • Probe attenuation setting:
    • Voltage probe:  1:1, 10:1, 100:1, 1000:1
    • Cur probe:  10 A:1 V (for the 700937/701933), 100 A: 1 V (for the 701930/701931)
  • Reference junction compensation accuracy (When the input terminal temperature is balanced:
    • K, E, J, T, L, U, N:   ±1 C
    • R, S, B, W:   ±1.5 C
    • Au7Fe:     ±1K
  • Bandwidth limit (digital filter):  Select from OFF, 30 Hz, 8 Hz, and 2 Hz
  • Input bias current:  20 nA or less
Clicky Copyright © 2013-present Magento, Inc. All rights reserved.