Fujikura
Fujikura FSM50S
Fusion Splicer SM & MM
Single-mode, Multimode, and Special fibers (SM, MM, DS, NZDS, EDF) Fiber Type Compatibility
9 seconds (typical for SM fiber) Splicing Time
35 seconds (with standard heat shrink sleeve) Heating Time
0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS), 0.04 dB (NZDS) Splice Loss (Typical)
80 to 150 µm Fiber Diameter (Cladding)
| Attribute | Value |
|---|---|
| Fiber Type Compatibility | Single-mode, Multimode, and Special fibers (SM, MM, DS, NZDS, EDF) |
| Splicing Time | 9 seconds (typical for SM fiber) |
| Heating Time | 35 seconds (with standard heat shrink sleeve) |
| Splice Loss (Typical) | 0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS), 0.04 dB (NZDS) |
| Fiber Diameter (Cladding) | 80 to 150 µm |
| Fiber Diameter (Coating) | 100 to 1000 µm |
| Cleave Angle Limit | 2.0° (standard), 3.0° (selectable) |
| Battery Capacity | Approximately 200 splice and heat cycles per charge |
| Display | 5.0-inch color LCD monitor with dual camera viewing system |
| Operating Temperature Range | -10°C to +50°C (14°F to 122°F) |
| Model | FSM50S |
|---|
Average Splice loss: 0.02dB with singlemode; 0.01dB loss for multimode; 0.04dB loss with dispersion and non-zero dispersion shifted fibre.
Splicing Time: Typical 9 seconds with standard SM fiber
Viewing Method: Dual cameras with 5.6 inch colour
