Glassman
Glassman ER30N10
Negative Polarity 300 Watt DC Power Supply.
30 kV Output Voltage
10 mA Output Current
300 W Output Power
Negative Output Polarity
115/230 VAC, 50/60 Hz Input Voltage
| Attribute | Value |
|---|---|
| Output Voltage | 30 kV |
| Output Current | 10 mA |
| Output Power | 300 W |
| Output Polarity | Negative |
| Input Voltage | 115/230 VAC, 50/60 Hz |
| Voltage Regulation (Line/Load) | 0.005% of maximum output |
| Current Regulation (Line/Load) | 0.01% of maximum output |
| Ripple and Noise | 0.01% RMS of maximum output voltage |
| Control Interface | Local (front panel) and Remote (0–10 V analog) |
| Cooling Method | Forced Air (Fan Cooled) |
Glassman ER30N10 Options:
- ER30N10 - 100 - 100 V input, rated 90-110 V RMS, 48-63 Hz
- ER30N10 - 220 - 220 V input, rated 200-264 V RMS, 48-63 Hz
- ER30N10 - 400 - 48-420 Hz, available on standard model and options 100 and 220
- ER30N10 - DM - 3-1/2 digit LCD panel meters
- ER30N10 - NC - Blank front panel (power switch only)
- ER30N10 - CT - Current trip. Power supply trips off when the load current reaches the programmed level. This option has a rear panel switch that selects either "trip" operation or current limiting
- ER30N10 - ZR - Zero start interlock. Voltage control must be at zero before accepting an enable signal
- ER30N10 - SS - Slow start ramp of up to 30 seconds available. Specify time
- ER30N10 - 5VC - 0-5 V voltage and current program/monitor
| Model | ER30N10 |
|---|
The Glassman ER30N10 is a negative polarity 300 Watt reulated High Voltage DC Power Supply.
