Anritsu
Anritsu 69397B
10MHz-65GHz Signal Generator
10 MHz - 40 GHz Gamma di Frequenza
+20 dBm (tipico) Potenza di Uscita
0,001 Hz Risoluzione di Frequenza
-80 dBc/Hz a 10 kHz di offset (tipico) Purezza Spettrale (SSB Phase Noise)
AM, FM, Modulazione di Fase e Impulso Modulazione Supportata
| Attributo | Valore |
|---|---|
| Gamma di Frequenza | 10 MHz - 40 GHz |
| Potenza di Uscita | +20 dBm (tipico) |
| Risoluzione di Frequenza | 0,001 Hz |
| Purezza Spettrale (SSB Phase Noise) | -80 dBc/Hz a 10 kHz di offset (tipico) |
| Modulazione Supportata | AM, FM, Modulazione di Fase e Impulso |
| Impedenza di Uscita | 50 Ohm |
| Connettore di Uscita RF | 2,92 mm (K-type) |
| Alimentazione | 100-240 V CA, 50/60 Hz |
| Interfacce di Controllo | GPIB, RS-232 |
| Dimensioni (L x A x P) | 425 mm x 177 mm x 498 mm |
Anritsu 69397B Options:
- 69397B - Option 1 - Rack Mounting: Rack mount kit containing a set of track slides (90° tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 48 cm equipment rack
- 69397B - Option 2A - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced
- 69397B - Option 2B - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤40 GHz. Rated RF output power is reduced
- 69397B - Option 2C - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤50 GHz. Rated RF output power is reduced
- 69397B - Option 2D - Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤60 GHz. Rated RF output power is reduced
- 69397B - Option 2E - Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤8.4 GHz. Rated RF output power is reduced
- 69397B - Option 2F - Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced
- 69397B - Option 6 - Phase Modulation (ΦM): Provides phase modulation capability. FM input, FM output and FM generator become FM/ΦM input, FM/ΦM output and FM/ΦM generator
- 69397B - Option 7 - Delete AM/FM Generators: Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. (Not available in combination with Option 8 or Option 20)
- 69397B - Option 8 - Internal Power Measurement: Adds an internal power measurement function that is compatible with Anritsu 560-7, 5400-71 or 6400-71 series detectors. (Not available in combination with Option 7)
- 69397B - Option 9 - Rear Panel RF Output: Moves RF output connector to the rear panel
- 69397B - Option 10 - User-defined Modulation Capability: Provides user-defined waveform capability. Requires controller (not included). Includes cable and Windows-based software
- 69397B - Option 11 - 0.1 Hz Frequency Resolution: Provides frequency resolution of 0.1 Hz
- 69397B - Option 14 - Anritsu 360B VNA Compatibility: Modifies rack mounting hardware to mate the unit in an Anritsu 360B VNA console
- 69397B - Option 15B - High Power Output: Adds high-power RF components to the instrument in the 2–20 GHz frequency range
- 69397B - Option 16 - High Stability Time Base: Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base. Derate phase noise specification at 10 Hz offset by 8 dB
- 69397B - Option 17A - Delete Front Panel: Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed
- 69397B - Option 18 - mmWave Bias Output: Adds rear panel bias output to drive 54000-xWRxx millimeter wave source modules. BNC Twinax connector. (Not available in combination with Option 20)
- 69397B - Option 19 - SCPI Programmability: Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.2–1987
- 69397B - Option 21A - Low Phase Noise, Non-pulsed Digital Downconverter: Replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW only from 10 MHz to 2.2 GHz
- 69397B - Option 21B - Low Phase Noise, Pulsed Digital Downconverter: Replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW with pulse modulation from 10 MHz to 2.2 GHz
- 69397B - Option 22 - 0.1 Hz to 10 MHz Audio Frequency: Adds CW and step sweep frequency coverage below 10 MHz. No modulation is available below 10 MHz. (Not available in combination with Option 20)
| Model | 69397B |
|---|
Il Keysight (Anritsu) 69397B è un generatore RF ad alte prestazioni che copre da 0,010 a 65 GHz, con rumore di fase ultra-basso, commutazione rapida (< 5 ms) e ampia gamma dinamica. Include generatori interni AM, FM e ΦM con più forme d’onda, oltre a modulazione esterna, trigger di impulsi flessibili e funzionalità avanzate di sweep digitale e analogico. La potenza in uscita varia da +17 dBm a −140 dBm con controllo del livello preciso, ideale per ambienti di test RF esigenti.
Gli ingegneri si affidano al Keysight (Anritsu) 69397B per test rigorosi di filtri, amplificatori e componenti RF grazie ai livelli di uscita accurati, alla velocità di sweep e robusta simulazione del segnale.
Testwall può fornire il Keysight (Anritsu) 69397B usato, completamente testato. Con supporto esperto e consegna globale, Testwall garantisce strumentazione ad alte prestazioni con affidabilità e qualità del servizio senza pari. Contattaci direttamente se hai bisogno di calibrazione o riparazione del Keysight (Anritsu) 69397B.
