Ceyear
Ceyear 3672B
10MHz - 26.5GHz Network Analyser
100 kHz – 26,5 GHz Gamma di frequenza
2 porte Numero di porte
Fino a 132 dB Dinamica di misura
Da -10 dBm a +10 dBm (tipica) Potenza di uscita
±1 ppm Accuratezza della frequenza
| Attributo | Valore |
|---|---|
| Gamma di frequenza | 100 kHz – 26,5 GHz |
| Numero di porte | 2 porte |
| Dinamica di misura | Fino a 132 dB |
| Potenza di uscita | Da -10 dBm a +10 dBm (tipica) |
| Accuratezza della frequenza | ±1 ppm |
| Coefficienti S misurabili | S11, S21, S12, S22 |
| Connettore RF | 3,5 mm (compatibile SMA) |
| Velocità di misura | Fino a 42 µs per punto |
| Punti di traccia | Da 1 a 100.001 punti per traccia |
| Interfacce di comunicazione | USB, LAN (LXI), GPIB (opzionale) |
Ceyear 3672B Options:
- 3672B - 201 - 2-Port Programmable Step Attenuator: Set two 70dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
- 3672B - 400 - 4-Port Measurement: Two-source stimulus four-port VNA configuration
- 3672B - 401 - 4-Port Programmable Step Attenuator: Set four 70dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
- 3672B - 402 - Active Inter-modulation Measurement: For inter-modulation signal measurement of amplifier (Option 400 is needed)
- 3672B - 006 - English Options: Key, Front Panel, Label, Operation System
- 3672B - 008 - Pulse Measurement: For pulse S-parameter measurement
- 3672B - S10 - Time Domain Measurement: For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables
- 3672B - S80 - Frequency Offset Measurement: For frequency offset measurement; millimeter-wave frequency extension main unit needs this option
- 3672B - S82 - Mixer Scalar Measurement: For the scalar parameter measurement of mixers (Option 400 is needed)
- 3672B - S83 - Mixer Vector Measurement: For the vector parameter measurement of mixers (Option 400 is needed)
- 3672B - S84 - Embedded LO Frequency Converter Measurement: For the measurement of embedded LO frequency converters (Option 400, S82 or S83 are needed)
- 3672B - S86 - Gain Compression Two-Dimension Sweep Measurement: For the gain compression two-dimension sweep test of amplifier
| Model | 3672B |
|---|
Product Overview
3672 Series Vector Network Analyzers include 3672A (10MHz~13.5GHz), 3672B (10MHz~26.5GHz), 3672C (10MHz~40GHz), 3672D (10MHz~50GHz) and 3672E (10MHz~67GHz). In terms of hardware, comparing to last generation, the brand-new design concept and technical proposal have upgraded key performance indexes (KPI) of the complete machine such as sweep speed and dynamic range etc.; in terms of software, the embedded computer system (ECS) with high-performance microprocessor chip and the platform based on Windows operating system has greatly improved interconnectivity and usability of the complete machine. 3672 analyzers provide multiple calibration types including frequency response, single port, response isolation, enhanced response and full dual-port, electronic calibration etc., offer various display formats such as logarithmic amplitude, linear amplitude, standing-wave, phase, group delay, Smith chart and polar coordinates, etc..They are designed with several standard interfaces: USB, LAN, GPIB and VGA etc. Besides all measurement functions same as traditional vector network analyzer, through configuration of functional options, 3672 analyzers are also capable of multifunctional & comprehensive parameter test of mixer/converter, gain compression two-dimensional sweep and pulse S-parameters, as well as accuracy measurement of amplitude-frequency characteristics, phase-frequency characteristics and group delay used in the field of transmitting/receiving (T/R) module measurement, dielectric material properties measurement, microwave pulse characteristics measurement and optoelectronic properties measurement, which are indispensable instruments for scientific research and manufacturing process of radar, communication, and navigation systems.
Main Characteristics
Flexible and optional calibration types, compatible with multiple calibration kits
Support multi-window, multi-channel tests, fast implementation of complex test scheme
Available in multiple display formats such as logarithmic amplitude, linear amplitude, standing-wave, phase, Smith chart
With USB, GPIB, LAN and VGA display interface
12.1 inch high resolution touch screen
Record/run, one-click operation greatly simplifies the measurement setting steps and improves the efficiency
Available in functions as pulse S parameter measurement, time-domain measurement, mixer measurement, gain compression two-dimensional sweep measurement, millimeter-wave frequency extension, antenna & RCS measurement and receiving etc..
