EN
DE
ES
FR
PL
Chroma 62015B-60-25
| Produttore | Chroma |
| Modello | 62015B-60-25 |
| Prodotto | DC Power Supply Module, 60V, 25A, 1500W |
| Tipo | Usato |
SKU
122757
Chroma 62015B-60-25 The Chroma 62015B-60-25 DC Power Supply Module, with its many unique features, is designed for burn-in applications such as the LCD panels, DC-DC converters, power inverters, notebook computers, battery chargers and many other typs of electronic devices. Its high power density and low cur ripple make it very cost effective. Designed with Modern power factor correction circuitry it meets IEC requirements.
Features and Specifications of the Chroma 62015B-60-25 DC Power Supply Module include:Features: Specifications: N+1 Redundancy Hot-Swappable Maintenance Ideal for Burn-in and Plating High Power Applications with CSU Remote Sense Remote ON / OFF CAN Bus Control DC OK Signal Output Voltage range: 1 ~ 60V Cur range: Up to 2000A (System) Power range up to 1.5KW per module up to 120KW per system High Power Density (464 mW / cm3 = 7.13 W/In3) Electrical Specifications: Protection Function: I/O Signal: Programming Response Time (Six Position Mainframe through CAN) (Typical): General Specifications: Output Ratings: LIne Regulation: 0.1% FS Load Regulation: 1% FS Programming Accuracy: 1% FS Measurement Accuracy: 1% FS Output Noise (20MHz): Efficiency: > 88% @ full load Turn On Over Shoot Voltage (Rise Time of 100ms): 5% of nominal output Transient Response Time: < 5 ms AC Input Voltage: Output Power: 1500W Output Voltage: 1~60V Output Cur: 1~25A Voltage Noised (P-P): 200mV Voltage Ripple (rms): 50mV Cur Ripple (rms): 0.25A Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz Input Power Factor: > 0.98@ full load OVP: Automatically shuts down at 115% of set value Adjustment Range: 1~65V OCP: Cur limit (0 ~ 100%) / OCP Shutdown at 115% of F.S. OTP: Automatically shuts down if internal limit is reached Remote ON/OFF (I/P): Dry contact (closed = enabled), vice versa AUX Voltage: 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage) DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault) Rise Time (Full Load): For a programmed 5% to 95% step in output voltage : 100ms Rise Time (No Load): For a programmed 5% to 95% step in output voltage : 100ms Fall Time (Full Load): For a programmed 95% to 5% step in output voltage : 40ms Fall Time (No Load): For a programmed 95% to 5% step in output voltage : 5s Vout Setting: CAN Bus send command to DC module receiver : 1s Measurement V & I: Under CAN command using fetch : 100ms Delay Time: For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe) Remote Sensing: 3V maximum line loss compensation Parallel Operation: Cur Sharing (±5%) Operating Temperature: 0 ~ 50°C Humidity Range: 0 ~ 90% RH. Non-condensing Remote Interface: CAN Bus (optional) Safety & EMC: CE
Features and Specifications of the Chroma 62015B-60-25 DC Power Supply Module include:
- N+1 Redundancy
- Hot-Swappable Maintenance
- Ideal for Burn-in and Plating
- High Power Applications with CSU
- Remote Sense
- Remote ON / OFF
- CAN Bus Control
- DC OK Signal Output
- Voltage range: 1 ~ 60V
- Cur range: Up to 2000A (System)
- Power range up to 1.5KW per module up to 120KW per system
- High Power Density (464 mW / cm3 = 7.13 W/In3)
- Electrical Specifications:
- Output Ratings:
- Output Power: 1500W
- Output Voltage: 1~60V
- Output Cur: 1~25A
- LIne Regulation: 0.1% FS
- Load Regulation: 1% FS
- Programming Accuracy: 1% FS
- Measurement Accuracy: 1% FS
- Output Noise (20MHz):
- Voltage Noised (P-P): 200mV
- Voltage Ripple (rms): 50mV
- Cur Ripple (rms): 0.25A
- Efficiency: > 88% @ full load
- Turn On Over Shoot Voltage (Rise Time of 100ms): 5% of nominal output
- Transient Response Time: < 5 ms
- AC Input Voltage:
- Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
- Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
- Input Power Factor: > 0.98@ full load
- Output Ratings:
- Protection Function:
- OVP: Automatically shuts down at 115% of set value
- Adjustment Range: 1~65V
- OCP: Cur limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.
- OTP: Automatically shuts down if internal limit is reached
- I/O Signal:
- Remote ON/OFF (I/P): Dry contact (closed = enabled), vice versa
- AUX Voltage: 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)
- DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)
- Programming Response Time (Six Position Mainframe through CAN) (Typical):
- Rise Time (Full Load): For a programmed 5% to 95% step in output voltage : 100ms
- Rise Time (No Load): For a programmed 5% to 95% step in output voltage : 100ms
- Fall Time (Full Load): For a programmed 95% to 5% step in output voltage : 40ms
- Fall Time (No Load): For a programmed 95% to 5% step in output voltage : 5s
- Vout Setting: CAN Bus send command to DC module receiver : 1s
- Measurement V & I: Under CAN command using fetch : 100ms
- Delay Time: For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)
- General Specifications:
- Remote Sensing: 3V maximum line loss compensation
- Parallel Operation: Cur Sharing (±5%)
- Operating Temperature: 0 ~ 50°C
- Humidity Range: 0 ~ 90% RH. Non-condensing
- Remote Interface: CAN Bus (optional)
- Safety & EMC: CE
- Output Ratings:
- Output Power: 1500W
- Output Voltage: 1~60V
- Output Cur: 1~25A
- LIne Regulation: 0.1% FS
- Load Regulation: 1% FS
- Programming Accuracy: 1% FS
- Measurement Accuracy: 1% FS
- Output Noise (20MHz):
- Voltage Noised (P-P): 200mV
- Voltage Ripple (rms): 50mV
- Cur Ripple (rms): 0.25A
- Efficiency: > 88% @ full load
- Turn On Over Shoot Voltage (Rise Time of 100ms): 5% of nominal output
- Transient Response Time: < 5 ms
- AC Input Voltage:
- Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
- Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
- Input Power Factor: > 0.98@ full load
- OVP: Automatically shuts down at 115% of set value
- Adjustment Range: 1~65V
- OCP: Cur limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.
- OTP: Automatically shuts down if internal limit is reached
- Remote ON/OFF (I/P): Dry contact (closed = enabled), vice versa
- AUX Voltage: 4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)
- DC OK Signal Type (O/P): Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)
- Rise Time (Full Load): For a programmed 5% to 95% step in output voltage : 100ms
- Rise Time (No Load): For a programmed 5% to 95% step in output voltage : 100ms
- Fall Time (Full Load): For a programmed 95% to 5% step in output voltage : 40ms
- Fall Time (No Load): For a programmed 95% to 5% step in output voltage : 5s
- Vout Setting: CAN Bus send command to DC module receiver : 1s
- Measurement V & I: Under CAN command using fetch : 100ms
- Delay Time: For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)
- Remote Sensing: 3V maximum line loss compensation
- Parallel Operation: Cur Sharing (±5%)
- Operating Temperature: 0 ~ 50°C
- Humidity Range: 0 ~ 90% RH. Non-condensing
- Remote Interface: CAN Bus (optional)
- Safety & EMC: CE
- Output Power: 1500W
- Output Voltage: 1~60V
- Output Cur: 1~25A
- Voltage Noised (P-P): 200mV
- Voltage Ripple (rms): 50mV
- Cur Ripple (rms): 0.25A
- Six Position Mainframe: 187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
- Three Position Mainframe: 187 to 250 Vac (single phase) / 45 ~ 65 Hz
- Input Power Factor: > 0.98@ full load
Resi
Se non sei completamente soddisfatto del tuo acquisto, restituisci semplicemente l’articolo nelle condizioni originali entro 30 giorni dalla ricezione. Gli articoli restituiti devono essere inutilizzati e riconsegnati nell’imballaggio originale con tutta la documentazione allegata. Emetteremo un rimborso completo al ricevimento, escluse le spese di spedizione iniziali. In alternativa, se preferisci, possiamo sostituire l’articolo.
IVA
I prezzi sono al netto dell’IVA. Transazioni intracomunitarie: Secondo la Direttiva IVA dell’UE, le vendite B2B di beni all’interno dell’UE sono esenti da IVA. Dove applicata, l’aliquota IVA è del 23%. L’IVA non viene addebitata al di fuori dell’UE.
