Chroma
Chroma 63600-2
DC Electronic Load Mainframe
800 V Tensione di Ingresso Massima
120 A Corrente di Ingresso Massima
3600 W Potenza Massima
2 canali indipendenti Numero di Canali
CC, CV, CR, CP Modalità di Funzionamento
| Attributo | Valore |
|---|---|
| Tensione di Ingresso Massima | 800 V |
| Corrente di Ingresso Massima | 120 A |
| Potenza Massima | 3600 W |
| Numero di Canali | 2 canali indipendenti |
| Modalità di Funzionamento | CC, CV, CR, CP |
| Interfacce di Comunicazione | GPIB, RS-232, USB, Ethernet (opzionale) |
| Risoluzione della Tensione | 1 mV |
| Risoluzione della Corrente | 1 mA |
| Dimensioni (L x A x P) | 426 mm x 88 mm x 550 mm |
| Alimentazione Richiesta | 100 – 240 V CA, 50/60 Hz |
Chroma 63600-2 Options:
- 63600-2 - A636000 - GPIB Interface
- 63600-2 - A636001 - Ethernet Interface
- 63600-2 - A636003 - External Signal Board (Test Pin)
- 63600-2 - A636005 - External Signal Board (BNC)
- 63600-2 - A632006 - NI USB-6211 Bus-Powered Multifunction DAQ
| Model | 63600-2 |
|---|
Chroma 63600-2 2-Slot DC Electronic Load Mainframe
Modern electronic devices operate at very high speed and demand rapid transient response characteristics. To address these applications the Chroma 63600 Series DC Electronic Loads offer high speed, programmable dynamic loading, sweep simulation and control capability never before achieved. The Chroma 63600-2 electronic load mainframe accepts two user-installable 63600 series load modules for easy system configuration, designed for testing multi-output AC/DC power supplies, DC/DC converters, chargers, batteries, server power supplies, and power electronic components. 100 programmable loading sequences enable the user to simulate various real world conditions. In addition, each module can be operated independently or synchronized so that all modules start operating at the same time while running independent programs. The 63600-2 provides three operating cur ranges and a built-in 16-bit, precision A/D converter, achieving 0.025%+0.01%F.S., 0.05%+0.05%F.S. and 0.1%+0.1%F.S. accuracy for voltage, cur and power measurement respectively. The DC load modules operate in constant voltage, cur, resistance, power, or impedance to satisfy a wide range of test requirements and real-time measurement of voltage and cur are integrated using a 16-bit measurement circuit with three cur ranges. Micro-processing capability has been integrated into each load module to optimize the speed and control among multiple load modules. All load modules are configured to work independently, though testing can be carried out simultaneously at multiple outputs via remote control to simulate real life application. Also included in the Chroma 63600-2 are self-diagnostic routines and full protections against OP, OC, OT and alarm indicating OV, reverse polarity. This ensures the quality and reliability and provides protection to units under test. Compatible Load Modules: For Single Slot and 5-Slot Mainframes, see Chroma 63600-1 and Chroma 63600-5
Modern electronic devices operate at very high speed and demand rapid transient response characteristics. To address these applications the Chroma 63600 Series DC Electronic Loads offer high speed, programmable dynamic loading, sweep simulation and control capability never before achieved. The Chroma 63600-2 electronic load mainframe accepts two user-installable 63600 series load modules for easy system configuration, designed for testing multi-output AC/DC power supplies, DC/DC converters, chargers, batteries, server power supplies, and power electronic components. 100 programmable loading sequences enable the user to simulate various real world conditions. In addition, each module can be operated independently or synchronized so that all modules start operating at the same time while running independent programs. The 63600-2 provides three operating cur ranges and a built-in 16-bit, precision A/D converter, achieving 0.025%+0.01%F.S., 0.05%+0.05%F.S. and 0.1%+0.1%F.S. accuracy for voltage, cur and power measurement respectively. The DC load modules operate in constant voltage, cur, resistance, power, or impedance to satisfy a wide range of test requirements and real-time measurement of voltage and cur are integrated using a 16-bit measurement circuit with three cur ranges. Micro-processing capability has been integrated into each load module to optimize the speed and control among multiple load modules. All load modules are configured to work independently, though testing can be carried out simultaneously at multiple outputs via remote control to simulate real life application. Also included in the Chroma 63600-2 are self-diagnostic routines and full protections against OP, OC, OT and alarm indicating OV, reverse polarity. This ensures the quality and reliability and provides protection to units under test. Compatible Load Modules: For Single Slot and 5-Slot Mainframes, see Chroma 63600-1 and Chroma 63600-5
