emtest UCS500N5

emtest UCS500N5 The emtest UCS 500N5 ultra-compact simulator is one of the most versatile testers to cover transient and power fail requirements according to international standards (basic and generic standards) and product/product family standards. The UCS500N5 is the most economic solution for tests during development as well as for full-compliant immunity tests and CE Marking for single phase DUT with the ability to be extended for testing three-phase DUTs by means of an automatically controlled external coupling network up to 100A.The emtest UCS 500N5 includes everything necessary to conduct fully compliant tests. The power mains supply for the controls and for the DUT is separate to render it more flexible to use with diffe DUT supply voltages.The emtest UCS500N5 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.Pre-programmed Standard Test routines allow highest user convenience. The UCS 500N5 also features a Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.Outstanding user convenience, clearly structured windows and operation features and the EM TEST standards library along with the flexibility to generate user specific test sequences very easily are the main features of iec.control software. The software is automatically configured according to the connected EM TEST generators. Extensive reporting capabilities help the user to create test reports that meet international requirements.iec.control sotware is supported by Windows 2000, Windows XP, Windows Vista and Windows 7. Remote control is achieved either via USB or GPIB. iec.control supports a wide range of GPIB cards of National Instruments.Product highlights of the emtest UCS500N5 include:

Burst module (IEC/EN 61000-4-4) up to 5.5kV

Surge module (IEC/EN 61000-4-5) up to 5kV

PowerFail module (IEC/EN 61000-4-11)

Magnetic field tests with optional accessoires

Built-in single phase coupler 300V/16A

Manual operation from front panel

USB and GPIB-Bus for remote control

Monitor outputs for peak voltage and peak cur

Fail inputs

External variac control 0-10Vdc

Control of external three-phase couplers

Ability to set all parameters even during the test

Select directly from statndard test levels

Stastistical test options

Predefined tests

The UCS500N5 has been replaced by the newer and improved emtest NX5