Espec TSE-12-A
| Attributo | Valore |
|---|---|
| Intervallo di temperatura | -65°C a +150°C |
| Numero di zone | 2 zone (zona calda e zona fredda) |
| Volume della camera | 12 litri |
| Tempo di trasferimento | Inferiore a 10 secondi |
| Uniformità della temperatura | ±2°C |
| Stabilità della temperatura | ±0,5°C |
| Alimentazione elettrica | 220V / 50Hz monofase |
| Consumo energetico | Circa 3,5 kW |
| Dimensioni esterne (L x P x A) | Circa 600 x 700 x 1200 mm |
| Conformità normativa | JIS C 60068-2-14, IEC 60068-2-14 |
Espec TSE-12-A Options:
- TSE-12-A - Power Cable - Standard power cable (approx. 2.5m, included as standard fitting)
- TSE-12-A - Recorder (digital) - Temperature recorder digital, RK-61 (1 pen), RK-63 (3 pens), or RK-64 (6 dots), -100 to +220°C /100mm
- TSE-12-A - Paperless Recorder - Records temperature of each section; 5.7-inch color touch panel, multiple input channel configurations, internal memory 8MB
- TSE-12-A - Recorder Wiring - Preparation of power cable, temperature sensor, and grounding wire for additional recorder installation
- TSE-12-A - Recorder Terminal - Used to output temperature within test area, hot chamber, cold chamber
- TSE-12-A - Emergency Stop Pushbutton - Stops the chamber immediately (with cover or with guard)
- TSE-12-A - Specimen Basket - Additional specimen basket, 18-8 Cr-Ni stainless steel 5 mesh, W320×H35×D230mm, load capacity 2kg
- TSE-12-A - Thermocouple - T JIS C1602 with ball attached, available in 2m, 4m, or 6m lengths
- TSE-12-A - Cable Port Rubber Plug - Prevents air leakage from the cable port
- TSE-12-A - Interface RS-485C - RS-485C communication interface
- TSE-12-A - Interface RS-232C - RS-232C communication interface
- TSE-12-A - Interface GPIB - GPIB communication interface
- TSE-12-A - Communication Cable RS-485C - RS-485C cable, 5m/10m/30m
- TSE-12-A - Communication Cable GPIB - GPIB cable, 2m/4m
- TSE-12-A - Total Cycle Counter - Indicates cycle counts, display range 1-99999999 with resetting function
- TSE-12-A - External Alarm Terminal - Notifies remote point when safety device is activated
- TSE-12-A - Auxiliary Cooling Injector LCO2 - Reduces temperature recovery time by injecting liquefied carbon dioxide at beginning of exposure
- TSE-12-A - Auxiliary Cooling Injector LN2 - Reduces temperature recovery time by injecting liquefied nitrogen at beginning of exposure
- TSE-12-A - Additional Overheat Protector - Additional preventive measures for excessive temperature rise, in addition to standard double overheat protector
- TSE-12-A - Anchoring Fixtures - Used to bolt the chamber to the floor
- TSE-12-A - Chamber Dew Tray - Prevents water leakage from the chamber onto the floor
- TSE-12-A - Reports & Certificates - Testing and inspection report, test data, calibration report, calibration certificate, traceability system chart, traceability certificate
- TSE-12-A - Operation Manual CD - Operation manual on CD
- TSE-12-A - Operation Manual Booklet - Operation manual in booklet format
| Model | TSE-12-A |
|---|
L’Espec TSE-12-A è una camera a shock termico progettata per testare la resistenza dei materiali a rapidi sbalzi di temperatura. Con cicli caldo-freddo veloci, riproduce condizioni di stress reali, ideale per elettronica, automotive e aerospazio. I sistemi di controllo avanzati garantiscono ripetibilità conforme agli standard internazionali.
Perfetta per la validazione dei prodotti, la TSE-12-A assicura affidabilità nei test di conformità riducendo i rischi di guasti. Il design supporta applicazioni critiche che richiedono precisione e robustezza.
Testwall può fornire l’Espec TSE-12-A usato, completamente testato. Con supporto esperto e consegna globale, Testwall garantisce strumenti ad alte prestazioni con affidabilità senza pari. Contattaci per calibrazione o riparazione dell’Espec TSE-12-A.
