Keysight (Agilent) E5058A

| Attributo | Valore |
|---|---|
| Intervallo di Frequenza | 10 MHz - 3 GHz |
| Numero di Porte | 4 porte |
| Tipo di Analizzatore | Analizzatore di Segnale SSB (Single Sideband) |
| Dinamica di Misura | Fino a 140 dB |
| Impedenza di Ingresso | 50 Ohm |
| Livello di Potenza di Ingresso Massimo | +30 dBm |
| Interfacce di Connettività | GPIB, USB, LAN (LXI) |
| Display | Display LCD a colori da 10,4 pollici |
| Alimentazione | 100-240 V CA, 50/60 Hz |
| Dimensioni (L x A x P) | 426 mm x 222 mm x 498 mm |
Keysight (Agilent) E5058A Options:
- 1-port or 2-port configuration (2-port adds vector network analysis)
- Standard or enhanced low phase noise configuration
- GPIB interface
- Core software (mandatory) - phase noise, AM noise and baseband noise measurements
- Advanced features - cross-correlation 2 to 100,000, transient measurements, VCO characterization, spectrum monitor
- Full-span spectrum analysis
- S96302B - Precision jitter analysis
- S96325B - Pulsed-RF AM/PM noise measurements
Keysight (Agilent) E5058A SSA-X Signal Source Analyzer, 1 MHz to 54 GHz
The Keysight E5058A is a member of the SSA-X signal source analyzer family, extending the platform introduced with the E5055A to 54 GHz. It is a bench-top phase noise and signal source analyzer for wireless communications, radar, aerospace and defense and high-speed digital applications, offering a frequency range of 1 MHz to 54 GHz, phase noise offset frequencies from 0.01 Hz to more than 1 GHz, and phase noise sensitivity of -171 dBc/Hz (typical, 16 GHz carrier, 1 MHz offset).
An ultra-low noise floor and the cross-correlation method give accurate, repeatable phase noise measurements, while flexible measurement settings and a modern touch-screen user interface improve throughput. A built-in clean internal source with path-delay compensation supports residual (additive) phase noise measurements, and two clean DC voltage channels plus tuning voltage outputs make VCO characterisation straightforward. Measurements above 54 GHz are supported with external mixers. Optional capabilities include a 2-port VNA, S96302B precision jitter analysis and compatibility with E5001A SSA-J software.
Specifications for the Keysight (Agilent) E5058A Signal Source Analyzer include:
| Frequency Range | 1 MHz to 54 GHz |
| Offset Frequency Range | 0.01 Hz to >1 GHz |
| Input Power Range | -50 dBm to +20 dBm (typ.) |
| Phase Noise Sensitivity | -171 dBc/Hz at 16 GHz, 1 MHz offset (typ.) |
| Measurement Method | Cross-correlation, with internal reference source |
| DC Outputs | 2 x clean DC supply plus tuning voltage outputs |
Image shows the E5055A; the E5058A shares the same SSA-X chassis.





