EN
DE
ES
FR
PL
My Quote
0
You have no items in your quote cart.
+39 02 4671 2525
Currency
Language 
IT
IT
Amplifier Research 1000S1G2Z5
| Manufacturer | Amplifier Research |
| Model | 1000S1G2Z5 |
| Product | RF Amplifier 1 - 2.5 GHz 1000W |
SKU
118256
Amplifier Research 1000S1G2Z5 The Amplifier Research 1000S1G2z5 is a self-contained, air-cooled, broadband amplifier designed for applications that require instantaneous bandwidth, high gain, and linearity. It is housed in a stylish cabinet and designed for benchtop use, but can be removed for equipment rack mounting.Features and Specifications of the Amplifier Research 1000S1G2z5 Amplifier include: Features: Specifications: Provides a minimum of 500 watts of RF power when used with a sweep generator Front panel gain control provides convenience of setting desired output level RF input leveling circuit: RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs Control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB and Ethernet Bus interface connector on back panel Local/Remote switch on front panel assures positive control of local or remote operation Low level of spurious signals and linearity make it ideal for these uses: Protects the amplifier from RF input overdrive Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm As a driver amplifier in testing wireless and communication components and subsystems As a test instrument covering mutiple frequency bands For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc. EMC Test applications where undistorted modulation envelopes are preferred Rated output power: 500 watts minimum Input for rated output: 1.0 milliwatt maximum Power output @ 3dB compression: Power output @ 1dB compression: Flatness: Frequency response: 1.0 – 2.5 GHz instantaneously Gain (at maximum setting): 57 dB minimum Gain adjustment (continuous range): 20 dB minimum (4096 steps remote) Input impedance: 50 ohms, VSWR 2.0:1 maximum Output impedance: 50 ohms nominal Mismatch tolerance: Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal Third order intercept point: 66 dBm typical Noise figure: 10 dB typical Harmonic distortion: Minus 20 dBc maximum at 350 watts Spurious: Minus 73 dBc typical Phase linearity: ±1.0 deg / 100 MHz typical Primary power (selected automatically): Connectors: Safety Interlock: 15 pin Subminiature D Cooling: Forced air (self contained fans) Nominal: 550 watts Minimum: 450 watts Nominal: 400 watts Minimum: 350 watts typical: ±1.5 dB maximum: ±2.0 dB 100% of rated power without foldback Will operate without damage or oscillation with any magnitude and phase of source and load impedance 90-264 VAC 50/60 Hz, single phase 2100 watts maximum RF: Type N female Remote Interfaces: IEEE-488: 24 pin RS-232: 9 pin Subminiature D RS-232 (fiber-optic): Type ST USB 2.0: Type B Ethernet: RJ-45
- Provides a minimum of 500 watts of RF power when used with a sweep generator
- Front panel gain control provides convenience of setting desired output level
- RF input leveling circuit:
- Protects the amplifier from RF input overdrive
- Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
- RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them
- Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs
- Control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB and Ethernet
- Bus interface connector on back panel
- Local/Remote switch on front panel assures positive control of local or remote operation
- Low level of spurious signals and linearity make it ideal for these uses:
- As a driver amplifier in testing wireless and communication components and subsystems
- As a test instrument covering mutiple frequency bands
- For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
- EMC Test applications where undistorted modulation envelopes are preferred
- Rated output power: 500 watts minimum
- Input for rated output: 1.0 milliwatt maximum
- Power output @ 3dB compression:
- Nominal: 550 watts
- Minimum: 450 watts
- Power output @ 1dB compression:
- Nominal: 400 watts
- Minimum: 350 watts
- Flatness:
- typical: ±1.5 dB
- maximum: ±2.0 dB
- Frequency response: 1.0 – 2.5 GHz instantaneously
- Gain (at maximum setting): 57 dB minimum
- Gain adjustment (continuous range): 20 dB minimum (4096 steps remote)
- Input impedance: 50 ohms, VSWR 2.0:1 maximum
- Output impedance: 50 ohms nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Third order intercept point: 66 dBm typical
- Noise figure: 10 dB typical
- Harmonic distortion: Minus 20 dBc maximum at 350 watts
- Spurious: Minus 73 dBc typical
- Phase linearity: ±1.0 deg / 100 MHz typical
- Primary power (selected automatically):
- 90-264 VAC
- 50/60 Hz, single phase
- 2100 watts maximum
- Connectors:
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Safety Interlock: 15 pin Subminiature D
- Cooling: Forced air (self contained fans)
- Protects the amplifier from RF input overdrive
- Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
- As a driver amplifier in testing wireless and communication components and subsystems
- As a test instrument covering mutiple frequency bands
- For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
- EMC Test applications where undistorted modulation envelopes are preferred
- Nominal: 550 watts
- Minimum: 450 watts
- Nominal: 400 watts
- Minimum: 350 watts
- typical: ±1.5 dB
- maximum: ±2.0 dB
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-264 VAC
- 50/60 Hz, single phase
- 2100 watts maximum
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
