Keysight DSOX3032A (Agilent) Oscilloscope The Keysight DSOX3032A (Agilent) is a two-channel model in the InfiniiVision 3000 X-Series. Engineered with breakthrough technology this upgradable Oscilloscope provides superior performance and functionality. Its unique 5-instruments-in-one design delivers more scope for the same budget.Features and Specifications of the Keysight DSOX3032A Oscilloscope include:Features of the Agilent DSOX3032A include:
One million waveforms per second update rate
MegaZoom IV smart memory technology
Large 8.5-inch WVGA display
Optional segmented memory
Industry’s first 5-instruments-in-1:
- Oscilloscope
- Digital channels
- Built-in 20 MHz function/arbitrary waveform generator with modulation
- Integrated digital voltmeter
- Protocol Analyser
Investment protection with Industry’s only fully-upgradable Oscilloscope, including bandwidth up to 1 GHz
Industry’s leading applications solution
Oscilloscope
Digital channels
Built-in 20 MHz function/arbitrary waveform generator with modulation
Integrated digital voltmeter
Protocol Analyser
Specifications of the Keysight DSOX3032A include:
Bandwidth (-3 dB): 350 MHz
Calculated rise time (10 – 90%): ≤ 1 ns
Input channels: 2 analog channels
Maximum sample rate:
- 4 GSa/s half channel
- 2 GSa/s all channel
Maximum memory depth:
- Standard 2 Mpts
- Optional 4 Mpts
- Optional segment memory
Display size and type: 8.5 WVGA display
Waveform update rate: > 1 million waveforms per second
Number of active probes supported: In general, one for 2-channel models
Vertical system analog channels:
- Hardware bandwidth limits: Approximately 20 MHz (selectable)
- Input coupling: AC, DC
- Input impedance: Selectable:
- 1 MΩ ± 1% (14 pF)
- 50 Ω ± 1.5%
- Input sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)
- Vertical resolution: 8 bits (measurement resolution is 12 bits with averaging)
- Maximum input voltage:
- 300 Vrms, 400 Vpk
- Transient overvoltage 1.6 kVpk
- With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
- Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk
- DC vertical accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
- DC vertical gain accuracy: ± 2.0% full scale
- DC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting
- Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
- Offset range:
- ± 2 V (1 mV/div to 200 mV/div)
- ± 50 V (> 200 mV/div to 5 mV/div)
Vertical system digital channels:
- Digital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)
- Thresholds: Threshold per pod
- Threshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)
- User-defined threshold range: ± 8.0 V in 10 mV steps
- Maximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk
- Threshold accuracy: ± (100 mV + 3% of threshold setting)
- Maximum input dynamic range: ± 10 V about threshold
- Minimum voltage swing: 5 mVpp
- Input impedance: 100 kΩ ± 2% at probe tip
- Input capacitance: ~8 pF
- Vertical resolution: 1 bit
Horizontal system analog channels:
- Time base range: 2 ns/div to 50 s/div
- Time base accuracy: 25 ppm ± 5 ppm per year (aging)
- Time base delay time range:
- Pre-trigger: Greater of 1 screen width or 250 μs
- Post-trigger: 1 s to 500 s
- Channel-to-channel deskew range: ± 100 ns
- Δ Time accuracy (using cursors): ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
- Modes: Main, zoom, roll, XY
- XY:
- On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold
- Bandwidth: Maximum bandwidth
- Phase error at 1 MHz: < 0.5 degree
Horizontal system digital channels:
- Minimum detectable pulse width: 5 ns
- Channel-to-channel skew:
- 2 ns (typical)
- 3 ns (maximum)
Aquisition system:
- Maximum analog channels sample rate:
- 4 GSa/s half channel interleaved
- 2 GSa/s all channel
- Maximum analog channels record length:
- 2 Mpts half channel interleaved, 1 Mpts all channel (standard)
- 4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))
- Maximum duration of time captured at highest sampling rate (all analog channels): 500 us with 4M memory upgrade
- Maximum digital channels sample rate: 1 GSa/s
- Maximum digital channels record length:
- 1 Mpts (standard with digital channels only)
- 2 Mpts (optional with DSOX3MEMUP – with digital channels only)
- Modes:
- Normal: Default mode
- Peak detect: Capture glitches as narrow as 250 ps at all time base settings
- Averaging: Selectable from 2, 4, 8, 16, 64, … to 65,536
- High resolution:
- Real time boxcar averaging reduces random noise and effectively increases vertical resolution
- 12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
- or ≥ 20-μs/div at 2 GSa/s
- Segmented:
- Segmented memory optimizes available memory for data streams that have long dead times between activity
- Maximum segments = 1000
- Re-arm time = 1 μs (minimum time between trigger events)
Trigger system:
- Trigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
- Trigger modes:
- Normal (triggered): requires trigger event for scope to trigger
- Auto : triggers automatically in absence of trigger event
- Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
- Force: front panel button that forces a trigger
- Trigger coupling:
- DC: DC coupled trigger
- AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
- High frequency reject: cutoff frequency ~ 50 kHz
- Low frequency reject: cutoff frequncy ~ 50 kHz
- Noise reject:
-
- Selectable OFF or ON
- Decreases sensitivity 2x
- Trigger holdoff range: 40 ns to 10.00 s
- Trigger sensitivity:
- Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
- External:
- 200 mVpp from DC to 100 MHz
- 350 mVpp 100 MHz to 200 MHz
- Trigger level range:
- Any channel: ± 6 div from center screen
- External: ± 8 V
4 GSa/s half channel
2 GSa/s all channel
Standard 2 Mpts
Optional 4 Mpts
Optional segment memory
Hardware bandwidth limits: Approximately 20 MHz (selectable)
Input coupling: AC, DC
Input impedance: Selectable:
- 1 MΩ ± 1% (14 pF)
- 50 Ω ± 1.5%
Input sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)
Vertical resolution: 8 bits (measurement resolution is 12 bits with averaging)
Maximum input voltage:
- 300 Vrms, 400 Vpk
- Transient overvoltage 1.6 kVpk
- With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
- Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk
DC vertical accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
DC vertical gain accuracy: ± 2.0% full scale
DC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting
Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
Offset range:
- ± 2 V (1 mV/div to 200 mV/div)
- ± 50 V (> 200 mV/div to 5 mV/div)
1 MΩ ± 1% (14 pF)
50 Ω ± 1.5%
300 Vrms, 400 Vpk
Transient overvoltage 1.6 kVpk
With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk
± 2 V (1 mV/div to 200 mV/div)
± 50 V (> 200 mV/div to 5 mV/div)
Digital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)
Thresholds: Threshold per pod
Threshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)
User-defined threshold range: ± 8.0 V in 10 mV steps
Maximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk
Threshold accuracy: ± (100 mV + 3% of threshold setting)
Maximum input dynamic range: ± 10 V about threshold
Minimum voltage swing: 5 mVpp
Input impedance: 100 kΩ ± 2% at probe tip
Input capacitance: ~8 pF
Vertical resolution: 1 bit
Time base range: 2 ns/div to 50 s/div
Time base accuracy: 25 ppm ± 5 ppm per year (aging)
Time base delay time range:
- Pre-trigger: Greater of 1 screen width or 250 μs
- Post-trigger: 1 s to 500 s
Channel-to-channel deskew range: ± 100 ns
Δ Time accuracy (using cursors): ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
Modes: Main, zoom, roll, XY
XY:
- On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold
- Bandwidth: Maximum bandwidth
- Phase error at 1 MHz: < 0.5 degree
Pre-trigger: Greater of 1 screen width or 250 μs
Post-trigger: 1 s to 500 s
On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold
Bandwidth: Maximum bandwidth
Phase error at 1 MHz: < 0.5 degree
Minimum detectable pulse width: 5 ns
Channel-to-channel skew:
- 2 ns (typical)
- 3 ns (maximum)
2 ns (typical)
3 ns (maximum)
Maximum analog channels sample rate:
- 4 GSa/s half channel interleaved
- 2 GSa/s all channel
Maximum analog channels record length:
- 2 Mpts half channel interleaved, 1 Mpts all channel (standard)
- 4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))
Maximum duration of time captured at highest sampling rate (all analog channels): 500 us with 4M memory upgrade
Maximum digital channels sample rate: 1 GSa/s
Maximum digital channels record length:
- 1 Mpts (standard with digital channels only)
- 2 Mpts (optional with DSOX3MEMUP – with digital channels only)
Modes:
- Normal: Default mode
- Peak detect: Capture glitches as narrow as 250 ps at all time base settings
- Averaging: Selectable from 2, 4, 8, 16, 64, … to 65,536
- High resolution:
- Real time boxcar averaging reduces random noise and effectively increases vertical resolution
- 12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
- or ≥ 20-μs/div at 2 GSa/s
- Segmented:
- Segmented memory optimizes available memory for data streams that have long dead times between activity
- Maximum segments = 1000
- Re-arm time = 1 μs (minimum time between trigger events)
4 GSa/s half channel interleaved
2 GSa/s all channel
2 Mpts half channel interleaved, 1 Mpts all channel (standard)
4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))
1 Mpts (standard with digital channels only)
2 Mpts (optional with DSOX3MEMUP – with digital channels only)
Normal: Default mode
Peak detect: Capture glitches as narrow as 250 ps at all time base settings
Averaging: Selectable from 2, 4, 8, 16, 64, … to 65,536
High resolution:
- Real time boxcar averaging reduces random noise and effectively increases vertical resolution
- 12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
- or ≥ 20-μs/div at 2 GSa/s
Segmented:
- Segmented memory optimizes available memory for data streams that have long dead times between activity
- Maximum segments = 1000
- Re-arm time = 1 μs (minimum time between trigger events)
Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
or ≥ 20-μs/div at 2 GSa/s
Segmented memory optimizes available memory for data streams that have long dead times between activity
Maximum segments = 1000
Re-arm time = 1 μs (minimum time between trigger events)
Trigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
Trigger modes:
- Normal (triggered): requires trigger event for scope to trigger
- Auto : triggers automatically in absence of trigger event
- Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
- Force: front panel button that forces a trigger
Trigger coupling:
- DC: DC coupled trigger
- AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
- High frequency reject: cutoff frequency ~ 50 kHz
- Low frequency reject: cutoff frequncy ~ 50 kHz
- Noise reject:
-
- Selectable OFF or ON
- Decreases sensitivity 2x
Trigger holdoff range: 40 ns to 10.00 s
Trigger sensitivity:
- Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
- External:
- 200 mVpp from DC to 100 MHz
- 350 mVpp 100 MHz to 200 MHz
Trigger level range:
- Any channel: ± 6 div from center screen
- External: ± 8 V
Normal (triggered): requires trigger event for scope to trigger
Auto : triggers automatically in absence of trigger event
Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
Force: front panel button that forces a trigger
DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
High frequency reject: cutoff frequency ~ 50 kHz
Low frequency reject: cutoff frequncy ~ 50 kHz
Noise reject:
- Selectable OFF or ON
- Decreases sensitivity 2x
Selectable OFF or ON
Decreases sensitivity 2x
Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
External:
- 200 mVpp from DC to 100 MHz
- 350 mVpp 100 MHz to 200 MHz
200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz
Any channel: ± 6 div from center screen
External: ± 8 V