Tektronix
Tektronix HDST1
HD-STI Stress Test Module for TG2000
Oscilloscopi Tektronix serie HDO, MDA800, MSO58LP Compatibilità
Kit di accessori per sonda differenziale ad alta tensione Tipo di sonda
1000 V CAT II Tensione massima di ingresso
Fino a 500 MHz Larghezza di banda
10:1 / 100:1 Rapporto di attenuazione
| Attributo | Valore |
|---|---|
| Compatibilità | Oscilloscopi Tektronix serie HDO, MDA800, MSO58LP |
| Tipo di sonda | Kit di accessori per sonda differenziale ad alta tensione |
| Tensione massima di ingresso | 1000 V CAT II |
| Larghezza di banda | Fino a 500 MHz |
| Rapporto di attenuazione | 10:1 / 100:1 |
| Impedenza di ingresso | 4 MΩ in parallelo con 3 pF |
| Fattore di forma | Sonda differenziale attiva |
| Temperatura di esercizio | 0°C fino a +50°C |
| Connettore di uscita | Connettore SMA compatibile con oscilloscopi Tektronix |
| Certificazioni | CE, UL, conformità RoHS |
Tektronix HDST1 Options:
- HDST1 - Opt. C3 - Calibration Service 3 Years
- HDST1 - Opt. R3 - Repair Service 3 Years
- HDST1 - Opt. 88 - Assembled and calibrated as a single unit
| Model | HDST1 |
|---|
TEKTRONIX HDST1
The Tektronix HDST1 is a HD-SDI Stress Test module that supports stress test capability for 1.485 and 1.485/1,001 Gb/s HD-SDI signals. The HDST1 takes in a single HD-SDI signal and outputs a stressed HD-SDI signal. HD signals from test signal generators (including the HDVG1 module), as well as from HD camera, VTRs, or switchers, can be used as the input signal. Signal stressing options include jitter (amplitude or frequency), amplitude, duty cycle, and random error insertion. The HDVG1 is recommended as a signal source, since it is capable of providing a signal with low residual jitter, as well as the ability to incorporate its frequency offset stress feature.
Features of the Tek HDST1 include:
- Amplitude and duty cycle of the output signal, jitter amplitude and frequency, and error rate are adjustable in real-time from the front panel of the TG2000
- Cable simulator of 20 m and 100 m
- Error insertion
- Calibration signal output
- Full remote control using GPIB or RS-232C Interface
