Yokogawa
Yokogowa AQ6370
600 nm to 1700 nm Optical Spectrum Analyser
600 nm – 1700 nm Intervallo di lunghezza d'onda
0,02 nm Risoluzione in lunghezza d'onda
±0,01 nm Precisione in lunghezza d'onda
78 dB Intervallo di livello dinamico
da +20 dBm a -90 dBm Intervallo di misura del livello
| Attributo | Valore |
|---|---|
| Intervallo di lunghezza d'onda | 600 nm – 1700 nm |
| Risoluzione in lunghezza d'onda | 0,02 nm |
| Precisione in lunghezza d'onda | ±0,01 nm |
| Intervallo di livello dinamico | 78 dB |
| Intervallo di misura del livello | da +20 dBm a -90 dBm |
| Precisione del livello | ±0,4 dB |
| Connettore di ingresso fibra ottica | Connettore universale FC (adattatori SC, LC, MU disponibili) |
| Interfacce di comunicazione | USB, GPIB, Ethernet (LAN) |
| Numero massimo di punti di campionamento | 50.001 punti |
| Alimentazione elettrica | 100 – 240 V CA, 50/60 Hz |
| Model | AQ6370 |
|---|
The AQ6370 uses a double-pass monochromator structure to achieve high wavelength resolution (0.02 nm) and wide close-in dynamic range (70 dB). Thus, closely allocated signals and noise can be separately measured. OSNR measurement of 50 GHz spacing DWDM transmission systems and EDFA evaluation with multiple wavelength sources can successfully be performed.
Power: +20 dBm to -90 dBm
The AQ6370 can measure optical power as high as +20 dBm, which enables direct measurement of high power sources such as optical amplifiers and pump lasers for Raman amplifiers. Measurement sensitivity can be chosen from seven categories according to test applications and measurement speed requirements.
Wavelength: 600 nm to 1700 nm
The AQ6370 covers not only telecommunication wavelengths, but also the visible light wavelength region which is used for home electronics, medical, and industrial material applications.
The AQ6370 uses a free space input structure that can handle up to GI 62.5/125 multimode fiber. Multimode fiber is commonly used in high speed Ethernet network, such as GE-PON.
The free space input is also beneficial for measurement repeatability as insertion loss variation at the input connector is smaller than the other input type which has an optical fiber inside the
The AQ6370 can catch the peak power of a pulsed signal using PEAK HOLD or using an externally provided trigger to synchronize with the measured signal. It can be applied to the transmission loop testing of telecommunication systems, and also to the low power measurement at the early stage of laser chip development since it works in the high sensitivity modes.
Key Features:
- High wavelength resolution: 0.02 nm
- Wide close-in dynamic range
- Multimode fiber test capability (up to GI 62.5/125?m)
- Pulsed light measurement cap ability
