Keysight (Agilent) 34907A
| Attribute | Value |
|---|---|
| Module Type | Multifunction Module |
| Analog Output Channels | 2 Channels, 16-bit DAC |
| Analog Output Voltage Range | ±12V |
| Digital I/O Lines | 8 Lines (TTL-compatible) |
| Totalizer/Counter Channels | 1 Channel, 26-bit |
| Totalizer Maximum Count Rate | Up to 100 kHz |
| Compatible Mainframes | Keysight 34970A / 34972A Data Acquisition / Switch Units |
| Output Current (Analog) | ±10 mA maximum per channel |
| Digital I/O Voltage Levels | Logic Low: 0–0.8V, Logic High: 2.0–5.25V |
| Totalizer Input Voltage Range | 0 to +5V TTL-compatible signals |
| Model | 34907A |
|---|
The Keysight (Agilent) 34907A integrates two 8-bit digital I/O ports, a 100 kHz gated totalizer, and two ±12V analog outputs on a single, earth-referenced module. It supports up to 120 channels with a 6½-digit internal DMM, built-in GPIB/RS-232 interfaces, and 50K non-volatile memory readings. The unit features real-time clock, continuous alarm monitoring, monitor display mode, and a scaling function for raw input conversion.
This module enables digital/event input scanning, TTL alarm output, and self-guiding menus for simplified operations. BenchLink Data Logger software is included for enhanced data handling.
Testwall can supply the used Keysight (Agilent) 34907A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) 34907A.
