Keysight Technologies 83496B

Agilent 83496BThe Agilent 83496B Clock Recovery Module with Phase Noise Analysis provides increased eye-mask and jitter measurement accuracy with breakthrough performance in clock recovery circuitry. It provides ideal performance for waveform analysis with the 86100C Digital Communications Analyser and can derive a clock from signals with rates as low as 50 Mb/s-14.2 GB/s*, and any rate in between. At under 300 femtoseconds rms, the residual jitter of the output clock is virtually negligible, allowing accurate measurements of very low levels of signal jitter.Features and specifications of the Agilent 83496B include:Optical clock recovery (option 101 only)

Inputs & outputs: 9/125 µm (single-mode) to 62.5/125 µm (multimode)

Wavelength range: 1250-1650 nm (single-mode), 750-1330 nm (multimode)

Minimum optical modulation amplitude: -11 dBm (1310/1550 single-mode), -10 dBm (1310 multimode), -8 dBm (850 multimode)

Electrical clock recovery (option 100 only)

Inputs: single-ended or diffeial, 3.5 mm (m) connectors

Outputs (option 100 only): single-ended or diffeial, 3.5 mm (m) connectors

Minimum electrical input level: 75 mVpp

Continuous unbanded tuning from 50 Mb/s up to 14.2 Gb/s

Golden PLL operation (option 300) with a tunable loop bandwidth from 15 KHz to 10 MHz

Ultra low residual jitter: < 300 fs rms (characteristic at 10 Gb/s)

High gain for tracking spread-spectrum signals

Phase noise analysis of clock or data signals

Compatibility

86100C Infiniium DCA-J Mainframe

86100D Infiniium DCA-X Mainframe