Keysight (Agilent) E7402A
| Attribute | Value |
|---|---|
| Frequency Range | 100 Hz to 3.0 GHz |
| Displayed Average Noise Level (DANL) | -152 dBm (with preamp, 1 GHz) |
| Phase Noise | -98 dBc/Hz at 10 kHz offset (1 GHz carrier) |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz (-3 dB), plus 200 Hz to 3 MHz (6 dB EMC bandwidths) |
| Amplitude Accuracy | ±0.5 dB total amplitude accuracy |
| Input Attenuator Range | 0 to 70 dB, in 2 dB steps |
| Maximum Input Power | +30 dBm (1 W) at the RF input port |
| Dynamic Range | >97 dB (1 Hz RBW, 1 GHz) |
| EMC Compliance Standards | CISPR 16-1 compliant; supports MIL-STD-461, FCC, VDE measurements |
| Preamplifier | Built-in low-noise preamplifier (100 kHz to 3.0 GHz), approximately 24 dB gain |
Keysight Technologies E7402A Options:
- E7402A - 1DN - Tracking generator (9 kHz to 3.0 GHz)
- E7402A - 1D6 - Gate trigger sweep option
- E7402A - AYX - Fast sweep times for zero span
- E7402A - BAB - 50 Ω APC 3.5 (m) input connector
- E7402A - A4H - GPIB interface (IEEE-488 bus connector)
- E7402A - 1AX - Serial interface (RS-232, 9-pin D-SUB)
| Model | E7402A |
|---|
The Keysight (Agilent) E7402A EMC Standard Analyzer enables in-house EMI pre-compliance testing with features such as 1 Hz to 5 MHz bandwidth, +12.5 dBm TOI, -150 dBm DANL, and optional 100 Hz low frequency support. It includes log sweep, built-in preamplifier, tracking generator, and supports field probes 11940A and 11941A.
Perfect for diagnosing emissions issues, the E7402A works with LISNs and antennas for testing radiated and conducted emissions, supported by BenchLink and E7415A EMI software.
Testwall can supply the used Keysight (Agilent) E7402A EMC Standard Analyzer, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Keysight (Agilent) E7402A EMC Standard Analyzer.
